Search found 1565 matches

by smwalker
Fri Sep 20, 2019 9:32 am
Forum: Stereo / Electronics / Electrical
Topic: Installing factory rear vision camera on 2014
Replies: 27
Views: 15288

Re: 2014+ Rearview Camera Technical Info

s/c'd cav wrote:
Fri Sep 20, 2019 9:12 am
if you need a harness tester let me know , my camera and trim are waiting
Did you get the GM Camera Harness as well?
Should know by Monday if we are good to go. Thanks for the offer.
by smwalker
Thu Sep 19, 2019 12:46 pm
Forum: General Discussion
Topic: Starter Wont Engage -Immobilizer ???
Replies: 15
Views: 2178

No Start -Immobilizer Message Displayed

A FB user had a similar situation with a car he bought at an auction, got there and got the immobilization message. Did the 30 minute relearn and it worked out well. The instructions say to use an master key. Not sure how you would know which key is the master key. This guy got 2 keys with the aucti...
by smwalker
Mon Sep 16, 2019 7:05 am
Forum: Stereo / Electronics / Electrical
Topic: taking the IQ radio apart and soldering the 20 pin connector
Replies: 22
Views: 17800

Re: taking the IQ radio apart and soldering the 20 pin connector

And just a heads up. I was talking with a FB user and he was explaining he was in the repo industry and recently picked up a Range Rover and thought the Connector looked familiar so he took a pic: https://i.imgur.com/F6EPviU.jpg https://i.imgur.com/sv5wpys.png?1 Looking closely at it and the diagram...
by smwalker
Mon Sep 16, 2019 6:49 am
Forum: Body, Appearance, Interior, & Detailing
Topic: Change caprice seats for 2014 Chevrolet SS sedan seats ???
Replies: 22
Views: 22635

Re: Change caprice seats for 2014 Chevrolet SS sedan seats ???

Only thing you need to do is bypass the memory module in the seat. Here is what someone posted to the FB group: https://i.imgur.com/Q9PsCXn.png?1 The connector under the seat is X323. So I guess on the SS Seat you will have wires going to each of those cavities but on the PPV side of the plug only o...
by smwalker
Mon Sep 16, 2019 6:48 am
Forum: Body, Appearance, Interior, & Detailing
Topic: 2014 ss seats in 2014 PPV Help!
Replies: 1
Views: 56

Re: 2014 ss seats in 2014 PPV Help!

Only thing you need to do is bypass the memory module in the seat. Here is what someone posted to the FB group: https://i.imgur.com/Q9PsCXn.png?1 The connector under the seat is X323. So I guess on the SS Seat you will have wires going to each of those cavities but on the PPV side of the plug only o...
by smwalker
Sat Sep 14, 2019 12:20 am
Forum: Stereo / Electronics / Electrical
Topic: How To - Build your own USB cable for 2011- 2013 PPV's
Replies: 37
Views: 43511

Re: How To - Build your own USB cable for 2011- 2013 PPV's

Came across this today. Seems the Peugeot 307 308 408 models use our same special USB connector in the radio. So this seller and a few more on ebay sell a straight USB cable. If you do not care about having a receptacle and just want a USB cord for the 11-13's this would work great for $10. This is ...
by smwalker
Wed Sep 11, 2019 6:18 pm
Forum: Stereo / Electronics / Electrical
Topic: taking the IQ radio apart and soldering the 20 pin connector
Replies: 22
Views: 17800

Re: taking the IQ radio apart and soldering the 20 pin connector

CHeck back for a new picture I got the positive and negative incorrectly labeled. Negatives are closest to the board edge.
by smwalker
Wed Sep 11, 2019 6:00 am
Forum: Stereo / Electronics / Electrical
Topic: taking the IQ radio apart and soldering the 20 pin connector
Replies: 22
Views: 17800

Re: taking the IQ radio apart and soldering the 20 pin connector

Here is a good quality picture with the plug not present on the board.

PIcture deleted - GOt it backwards even after I looked it up before hand!! DOH!! Editing a new PIC>

OK Here is the correct labeling:

Image
by smwalker
Wed Sep 11, 2019 4:35 am
Forum: New user - intro forum
Topic: New Owner from Canada
Replies: 21
Views: 14778

Re: New Owner from Canada

Moose whats the status on yours? Ever find affordable insurance ? Or is it just sitting?
by smwalker
Tue Sep 10, 2019 8:40 am
Forum: Stereo / Electronics / Electrical
Topic: Installing factory rear vision camera on 2014
Replies: 27
Views: 15288

2014+ Rearview Camera Technical Info

Another user asked me If I made a harness for this job so I thought I would look into what it would take. Looking at the wiring diagram and using the camera harness seems I could just add on from the light gray connector. As always would like to keep things as factory as possible and interface with ...