Search found 12 matches

by Jeff 9c3
Sat Sep 26, 2020 10:16 pm
Forum: Caprice PPV Parts for sale
Topic: 2012 Part out
Replies: 15
Views: 14755

Re: 2012 Part out

Hi
Looking for a non cracked, non painted grill.
I know you said the hood was bad but you never know until you ask.
Thank you.
by Jeff 9c3
Thu Sep 17, 2020 10:45 am
Forum: Stereo / Electronics / Electrical
Topic: 2012 Caprice PPV will not start. No crank.
Replies: 55
Views: 42849

Re: 2012 Caprice PPV will not start. No crank.

On my 11 i had left my obd2 adapter in the port and it would not start. It jist clicked in the trunk. So you may have a issue with secerity system or key fob = dead or weak battery. If you get it to run you may have hash shifting with the trans and abs lights on at 1st. I have had to reset my codes ...
by Jeff 9c3
Wed Sep 09, 2020 11:46 am
Forum: V8 engine tech (L77)
Topic: Mechanical oil pressure gauge
Replies: 4
Views: 8506

Re: Mechanical oil pressure gauge

You should have about 10 psi. Per. 1000 rpms So 1000 should be 10 / 25 2000 20 / 35 3000 35 / 45 Now this depends apon how the engine has been taken care of and how the internals are health wise. I have 140 k almost on my ppv at idle hot in drive i get 22 / 25 psi. In gear at highway speeds I get 45...
by Jeff 9c3
Sun Jul 12, 2020 1:09 pm
Forum: Caprice PPV Parts for sale
Topic: Parting out 2013 PPV 9C1
Replies: 39
Views: 33619

Re: Parting out 2013 PPV 9C1

The chrome is part of the quarter window assemble and is not sold separately by GM. It seems like loosing the chrome piece is common problem. Just a wild guess, but I would gamble the drive through car was is a contribution factor, since most of the cars were probably never hand washed. David Wow, ...
by Jeff 9c3
Sat Jul 11, 2020 12:13 pm
Forum: Caprice PPV Parts for sale
Topic: Parting out 2013 PPV 9C1
Replies: 39
Views: 33619

Re: Parting out 2013 PPV 9C1

Drivers side trim chrome around rear window where it comes to a point.
If it would fit a 9c3 body. In the pic provided.
2011 is the yearof my ppv.
Ty.
by Jeff 9c3
Sat Jul 11, 2020 11:56 am
Forum: V8 engine tech (L77)
Topic: LS3 OEM camshaft works with DOD!!
Replies: 19
Views: 27932

Re: LS3 OEM camshaft works with DOD!!

"823 vs 821 are virtually identical minus the hollow valves on the 821 ls3 heads. It just means you won’t have a broken valve on your current heads vs the hollow ones that seem to break off way more than you’d think......" Top Ok i didn't think of the broken valve happening . Hmmm. 823s ar...
by Jeff 9c3
Thu Jul 09, 2020 11:28 pm
Forum: V8 engine tech (L77)
Topic: LS3 OEM camshaft works with DOD!!
Replies: 19
Views: 27932

Re: LS3 OEM camshaft works with DOD!!

Nice No I don't have ls3 heads but I'm currently searching. Now that my ppv is all road legal in ny. So 4 cyl activation on decel with open cut outs . Back psi. In the exhaust isn't there anymore. You also may be experiencing a vacuum change as well & the ecm is seeing this & thinks you are ...
by Jeff 9c3
Thu Jul 09, 2020 10:10 am
Forum: V8 engine tech (L77)
Topic: LS3 OEM camshaft works with DOD!!
Replies: 19
Views: 27932

Re: LS3 OEM camshaft works with DOD!!

Hi there , I see the date on the update to the ls3 cam is 2017. Curious if you still have this set up? Also if it gave you any issues later on after the 2000 mile mark? I'm looking to upgrade my 2011 but I have been toying around the idea of a complete rebuild to a 408 cid. With some ls3 heads. Than...
by Jeff 9c3
Sun Jun 28, 2020 10:58 am
Forum: Intake/Exhaust/Fuel tech
Topic: Fuel maps? 2011 to 2013 9c3 ppv 87 vs 91 octane?
Replies: 3
Views: 4311

Re: Fuel maps? 2011 to 2013 9c3 ppv 87 vs 91 octane?

That's awesome. no e85 in ny unfortunately that I'm aware of. Thanks.
by Jeff 9c3
Sun Jun 28, 2020 10:36 am
Forum: General Discussion
Topic: OFFICIAL Master Production List - All Years
Replies: 49
Views: 65862

Re: OFFICIAL Master Production List - All Years

vin last 6 = 573837
6.0 l77
Gray or GR as ny called on title
Miles 135 k
From Georgia
2011 9C3
Nice inside not beat up.
Not sure what type of information this will bring.