New Caprice - Discussion forums

If I haven't already answered this on Facebook, my sincerest apologies...gets confusing sometimes. PICS above; I'll do $1,200 on the wheels and tires and $600 on the coil-overs. Again, my sincerest apologies for the 'delay'...if there was one.
Jim

Complete Set 19", Mounted/Balanced w/TPMS installed Front: Wheels: GM 9597858, 9", 51mm Offset, Tires: Nitto 555G2, P255/40 R19 Rear: Wheels: GM9597859, 9-1/2", 56mm Offset, Tires: Nitto 555G2, P285/35 R19 Tires: <500 mi. Front & Rear Stock Springs for 2011 PPV Coil Overs: CX xxx...

Complete Set 19", Mounted/Balanced w/TPMS installed Front: Wheels: GM 9597858, 9", 51mm Offset, Tires: Nitto 555G2, P255/40 R19 Rear: Wheels: GM9597859, 9-1/2", 56mm Offset, Tires: Nitto 555G2, P285/35 R19 Tires: <500 mi. Front & Rear Stock Springs for 2011 PPV Coil Overs: CX xxx...

Complete Set 19", Mounted/Balanced w/TPMS installed Front: Wheels: GM 9597858, 9", 51mm Offset, Tires: Nitto 555G2, P255/40 R19 Rear: Wheels: GM9597859, 9-1/2", 56mm Offset, Tires: Nitto 555G2, P285/35 R19 Tires: <500 mi. Front & Rear Stock Springs for 2011 PPV Coil Overs: CX xxxx...

Bottom end stock 2011 GM 6.0L, 65,500 miles, (block, crank, pistons, rods, bearings, etc.); compression test 165/175 psi all cylinders; top end all new by Texas Speed; LS3 heads, cam (duration @ .050 In-231, Ex-246, Lift- In-.376, Ex-.362…@1.7, In-.640, Ex-.615. Lobe separation 112, Intake Center Li...

2011 Caprice 9C3. 'Came' with Coil/Overs. They were too stiff for my taste. Ordered complete new suspension for a 2011 Caprice PPV/9C3 LS2 V8. It's not quite as 'bad/bumpy' as the coil-overs, but it's close. I'd like to 'relieve' it even more...little 'softer' ride. I rode in a 2015 PPV 6-cylinder. ...

I have a 2011 PPV. So far, the 'top end' has been outfitted by Texas Speed to include throttle body, intake, heads, cam, headers and full exhaust system. Would like to improve stopping with Brembo calipers and rotors. I'm looking and will continue to search the site. While I'm looking, has anyone 'd...