New Caprice - Discussion forums

I found these two sources:


https://www.ebay.com/itm/182900809992?e ... Swj6Jgtte8

https://www.ebay.com/itm/121697776738

Regards,

Maurice

They are just a press fit. With tabs top and bottom.

Maurice

Welcome to the group! I haven't heard of anyone doing a twin turbo setup, but you never know. There is a great group of people and information here.

Regards,

Maurice

I use HPTuners as an interface and I used Chris Henry Motorsports for the tuning. Chris is on the forum here and has a lot of experience with the G8's, Caprices and SS's. Great guy to work with.

Maurice

Maybe this will help...

https://www.newcaprice.com/forum/viewto ... 060#p33294

I just searched Camaro TR6060. There are other links also.

Regards,
Maurice

GEM1410,
On the third page of my post another member ran into something similar. See below:

viewtopic.php?f=18&t=835&hilit=struts&start=20

I believe that he ended up ordering the factory struts.

Regards,

Maurice

I would start with a charged battery installed. There is a shift interlock that needs to see 12v power. It's a combination of brake pedal depressed and 12v.

Regards,
Maurice

OK, My curiosity was piqued... So, I found this video. Comparing the two videos, there is outside air is available to the O2 sensor from gaps between the wires. I would also agree that you would not want to solder the wires as this would create a resistance and give an inaccurate reference voltage. ...

Would I be wrong in saying that some of the IP cluster information is via a serial bus circuit?. Also, doesn't the IP cluster need to be VIN synced? This keeps people from swapping out IP clusters for a lower odometer reading. All of the modules need the VIN to talk to each other, including the radi...

My 2011 9C3 has a BTR Stage 1 cam, stock converter and 3.45 gears, tuned by Chris Henry Motorsports. It is drivable in stop and go traffic. It doesn't push against the converter.

Maurice