G8 console swap~ need center support and shifter bezel

If you're looking for a specific Caprice PPV-related part, service, or car post your requests here.
Forum rules
SPECIAL NOTE - We have no role or liability in any transactions other then to provide a venue to advertise the items. Disputes must be resolved independently between the parties involved in any transaction.
Post Reply
BPeterson
Posts: 2
Joined: Tue Jul 28, 2020 4:36 pm

G8 console swap~ need center support and shifter bezel

Post by BPeterson »

In desperate need of the center support gm 92258108 or 92261672 and the shifter trim. Possibly a block off plate for the window controls. Let me know what you have!
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: G8 console swap~ need center support and shifter bezel

Post by smwalker »

Zach Watts is the guy behind IPF 3D printing. He has a few options for the window control hole:

https://ipf-3d-print-works.myshopify.co ... ctions/all
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
CrashTestDummy
Posts: 2300
Joined: Sat Feb 07, 2015 2:31 pm
Location: Pearland, Texas

Re: G8 console swap~ need center support and shifter bezel

Post by CrashTestDummy »

I have the console switch cubby, and it's a very nice piece. Didn't know he had branched out!
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
119C3NJ
Posts: 74
Joined: Thu Feb 07, 2019 4:53 pm
Location: New Jersey exit 120 GSP

Re: G8 console swap~ need center support and shifter bezel

Post by 119C3NJ »

I have 2 GM 9C3 shifter bezels here in NJ ready to ship njwheel@gmail.com correct color for PPV. center support is easiest to chop up a 9C1 and G8 like Dustin has done. then install 9C3 radio trim over top. I have 2 of those available also.
2011 9C3 Caprice PPV Phantom Black
1995 MG5 Yukon GT Black
1993 Harley Davidson FLSTC Black
BPeterson
Posts: 2
Joined: Tue Jul 28, 2020 4:36 pm

Re: G8 console swap~ need center support and shifter bezel

Post by BPeterson »

Ok thank you guys! I just bit the bullet and got the plate ordered for the window switch and ordered the shifter bezel. I guess I’ll gust chop up the center support
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: G8 console swap~ need center support and shifter bezel

Post by smwalker »

And just a FYI I recall someone is in the process of creating a 3D printed center support piece. That will be great if they can pull it off.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
lastcall190
Posts: 604
Joined: Mon Sep 11, 2017 5:17 am
Location: North Jersey

Re: G8 console swap~ need center support and shifter bezel

Post by lastcall190 »

Nice! I think 3D printing will be somewhat of a saving grace for these hard to find/NLA parts.

Great... now my wife will shoot me when I say in a few years, "Hey it's time for another Caprice, but it's ok the parts are 3D printed and it will be easy to acquire them this time!"

:roll:
2012 Caprice
2008 CVPI

Both gone but not forgotten...
Post Reply