P0606, p2610

Caprice and GM-related general tech topics.
Post Reply
Mikevtc
Posts: 6
Joined: Wed Sep 19, 2018 10:39 am
Location: Middle Tn.

P0606, p2610

Post by Mikevtc » Fri Sep 21, 2018 12:03 am

Hello,
I have a 2012 6.0 ppv.
I'm getting p0606 and p2610 codes. Displaying traction control fault, safety mode active, reduced power, and check engine on the dash. I repaired shorted wires at the crank position sensor plug. No change. Just wondering if anyone else has dealt with these codes and faults?

Thanks,
Mike

User avatar
Mooseman
Posts: 250
Joined: Tue Jun 13, 2017 4:35 am
Location: Ottawa, ON Canada
Contact:

Re: P0606, p2610

Post by Mooseman » Fri Sep 21, 2018 2:07 pm

Both of these codes, especially P0606, points to a failed PCM. If you know someone with a high-end scanner (Solus or Tech 2), get it troubleshot completely before replacing it. Maybe getting it updated might fix the issue.
2011 Caprice PPV, 1 of possibly 4 in Canada!
Image

Mikevtc
Posts: 6
Joined: Wed Sep 19, 2018 10:39 am
Location: Middle Tn.

Re: P0606, p2610

Post by Mikevtc » Sat Sep 22, 2018 12:28 am

Thanks.

Mikevtc
Posts: 6
Joined: Wed Sep 19, 2018 10:39 am
Location: Middle Tn.

Re: P0606, p2610

Post by Mikevtc » Sun Nov 18, 2018 3:56 pm

I found a ecm at a junk yard from a 13. Took everything to WellTek in Nashville and had it all programmed and flashed and matched to my keys and blah blah blah. At long last, my car is back among the living, responding perfectly to my throttle commands!
Mike at WellTek is super nice and very knowledgeable. He only does factory programming , not tuning.

WellTek
1052 4th ave S.
Nashville, tn.
615-736-5604

Now I can get'er tuned. I have several options for that locally. I will update after having that done.

Post Reply