2012 Cam Swap and Exhaust Video

Tech discussions on the L77 6.0L V8.
User avatar
YamWarrior
Posts: 11
Joined: Fri May 13, 2016 12:04 pm
Location: Hopkinsville, KY

Re: 2012 Cam Swap and Exhaust Video

Post by YamWarrior »

so a little update...

Took the car to LS Fest today in bowling green KY and put it on the dyno they had set up there. It was a dynojet dyno, temp was 92 degrees with 49% humidity. I managed to make 332hp and 306tq with my mild cam and axleback exhaust. Now i'll need an intake and headers and maybe my numbers will start to climb slowly.

EDIT* Just as a note, they were not able to lock out my converter on this dyno run, so i'm taking these results with a grain of salt. Will hopefully get it booked for a true dyno session with my tuner within a few months.
Buddhaz06
Posts: 1
Joined: Mon May 08, 2017 10:40 pm

Re: 2012 Cam Swap and Exhaust Video

Post by Buddhaz06 »

Do you have a parts list for the dod delete? I have a small 3bolt cam is all. Need whatever else. Lifters, what pushrods? Ls3 springs? Head gaskets. Timing cover gasket. Do I need a timing cover? What valley cover do I need? 3 bolt cam sprocket. Etc?
Pursuit
Administration Staff
Posts: 969
Joined: Tue Apr 23, 2013 3:39 pm
Location: Omaha, NE area

Re: 2012 Cam Swap and Exhaust Video

Post by Pursuit »

Budd,
There are quite a few complete DoD delete kits out there that include lifters, lifter buckets, pushrods, gaskets, non DoD valley cover, springs, bolts, etc. It's tough to source everything and still beat the kit pricing. Brian Tooley Racing, Livernois, Texas Speed are just a few that offer these.

Regards,

Maurice
Maurice Sheil

mhsheil@gmail.com

2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
Post Reply