PCV hose quick disconnects

Tech discussions on the L77 6.0L V8.
Post Reply
User avatar
kevink
Posts: 480
Joined: Sun Aug 09, 2015 12:55 pm

PCV hose quick disconnects

Post by kevink »

On the PCV hose that goes from the rear of the driver's side valve cover to the intake manifold, there are these plastic quick disconnects. Can they be purchased individually somewhere? Does anyone make them with AN or barbed ends on them? Lastly, if the individual fittings are not available, I may need to purchase one of these complete hose assemblies. What's the part number for this hose? Searching "PA66 GF33" brings up nothing.

Image
2011 9C3: 11.48 @118.
Navy Lifer
Administration Staff
Posts: 1724
Joined: Tue Mar 19, 2013 6:30 pm
Location: Canton GA

Re: PCV hose quick disconnects

Post by Navy Lifer »

Assuming your car is 2011?

https://www.tonkinonlineparts.com/showA ... gory=22488" onclick="window.open(this.href);return false;

https://www.tonkinonlineparts.com/p/Che ... 68697.html" onclick="window.open(this.href);return false;

Individual parts aren't serviced--replace the entire assembly.
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: PCV hose quick disconnects

Post by smwalker »

I see the "PA66 GF33" a lot on connectors, I think it is actually a code for the formula to mix the plastic to the correct specifications. You can usually ignore any number that starts with PA.

Yea fresh hoses is the best as they will come with fresh o-rings in there as well so will seal up the system nice.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
User avatar
kevink
Posts: 480
Joined: Sun Aug 09, 2015 12:55 pm

Re: PCV hose quick disconnects

Post by kevink »

Thanks guys. I still wonder if there's an aftermarket source for these fittings. Lots of searching has turned up nothing.
2011 9C3: 11.48 @118.
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: PCV hose quick disconnects

Post by smwalker »

Came across some ones for fuel lines that are set up for repair of lnes:

http://brakequip.com/products/fuel-line ... -fittings/" onclick="window.open(this.href);return false;
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Maxspeed96ct
Posts: 89
Joined: Fri Jul 21, 2017 6:27 am

Re: PCV hose quick disconnects

Post by Maxspeed96ct »

I hate those fittings, my drivers side valve cover has a hose with a clamp now. Its a odd size cause 3/8 compression would not work, I was going to try one of my fuel line x8an fittings but ended up leaving the 3/8 hose and clamp.
Post Reply