Lucy (2011 Caprice) gets a supercharger

Tech discussions on the L77 6.0L V8.
17mwolfe
Posts: 18
Joined: Fri Nov 29, 2019 10:45 pm

Re: Lucy (2011 Caprice) gets a supercharger

Post by 17mwolfe » Sun Jan 26, 2020 3:45 am

heat exchanger mounted nicely mounted the pump on the right side and mounted my new smaller washer fluid tank on the right
Attachments
0125202109a.jpg
0125202109a.jpg (1.01 MiB) Viewed 283 times
0125202046.jpg
0125202046.jpg (1.27 MiB) Viewed 283 times
0125202018.jpg
0125202018.jpg (1.31 MiB) Viewed 283 times
0125202016c.jpg
0125202016c.jpg (652.98 KiB) Viewed 283 times
0125202016b.jpg
0125202016b.jpg (834.23 KiB) Viewed 283 times
0125202016.jpg
0125202016.jpg (931.96 KiB) Viewed 283 times

CrashTestDummy
Posts: 2032
Joined: Sat Feb 07, 2015 8:31 pm
Location: Pearland, Texas

Re: Lucy (2011 Caprice) gets a supercharger

Post by CrashTestDummy » Sun Jan 26, 2020 5:03 am

I’ve read other posts that those things don’t fit under a stock hood without milling the top. What’s your solution?
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2010 Tahoe PPV (her car)
1995 DGGM Impala SS
1996 BBB Impala SS (11-second DD)
1985 Firebird - 310 LS1 C Prepared autocross car.
And some others
Do YOU have my SPID?

17mwolfe
Posts: 18
Joined: Fri Nov 29, 2019 10:45 pm

Re: Lucy (2011 Caprice) gets a supercharger

Post by 17mwolfe » Mon Jan 27, 2020 3:26 am

at least in my situation I can close the hood completely with the supercharger installed but it is extremely close and will surely rub with the engine running. so I will need to make clearance somehow. thinking about just nicely cutting the inner structure of the hood. those fins are very small but maybe i will look into getting my friend to mill down the top.

CrashTestDummy
Posts: 2032
Joined: Sat Feb 07, 2015 8:31 pm
Location: Pearland, Texas

Re: Lucy (2011 Caprice) gets a supercharger

Post by CrashTestDummy » Mon Jan 27, 2020 3:42 am

Milling the fins is what another member did for clearance. Seemed to work well.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2010 Tahoe PPV (her car)
1995 DGGM Impala SS
1996 BBB Impala SS (11-second DD)
1985 Firebird - 310 LS1 C Prepared autocross car.
And some others
Do YOU have my SPID?

17mwolfe
Posts: 18
Joined: Fri Nov 29, 2019 10:45 pm

Re: Lucy (2011 Caprice) gets a supercharger

Post by 17mwolfe » Fri Feb 14, 2020 8:07 pm

I
Attachments
86461938_187950559223418_7403295433751003136_n.jpg
86461938_187950559223418_7403295433751003136_n.jpg (300.05 KiB) Viewed 93 times
86423454_132476111341995_6798057412721901568_n.jpg
86423454_132476111341995_6798057412721901568_n.jpg (241.69 KiB) Viewed 93 times
86403051_152206325747138_7929271624333787136_n.jpg
86403051_152206325747138_7929271624333787136_n.jpg (224.09 KiB) Viewed 93 times
86374051_545331839670109_9148001756016279552_n.jpg
86374051_545331839670109_9148001756016279552_n.jpg (214.59 KiB) Viewed 93 times
86278700_603879996839090_4326654714306363392_n.jpg
86278700_603879996839090_4326654714306363392_n.jpg (261.9 KiB) Viewed 93 times
85174790_227469115084088_8483557782610509824_n.jpg
85174790_227469115084088_8483557782610509824_n.jpg (263.4 KiB) Viewed 93 times

17mwolfe
Posts: 18
Joined: Fri Nov 29, 2019 10:45 pm

Re: Lucy (2011 Caprice) gets a supercharger

Post by 17mwolfe » Fri Feb 14, 2020 8:16 pm

My brand new gm supercharger lid leaked as soon as I put coolant in it at the quick connect fittings. After a week of trying to make something work, I got 12 an fittings welded to the lid and got nice 90 degree fittings. i also got my custom intake welded up its made from a 90 and 60 degree bend of 4 inch tube . i aslo realized the pins are different for my new and stock MAF sensor so i had to de-pin and swap 2 wires i also installed summit racing spark plug wire heat socks
Attachments
Screen Shot 2020-02-08 at 11.47.03 PM.png
Screen Shot 2020-02-08 at 11.47.03 PM.png (49.54 KiB) Viewed 93 times
Screen Shot 2020-02-08 at 11.46.46 PM.png
Screen Shot 2020-02-08 at 11.46.46 PM.png (37.98 KiB) Viewed 93 times

17mwolfe
Posts: 18
Joined: Fri Nov 29, 2019 10:45 pm

Re: Lucy (2011 Caprice) gets a supercharger

Post by 17mwolfe » Fri Feb 14, 2020 8:20 pm

re mounted my power steering reservoir mounted my oil catch can the only thing im not completely happy with is my intercooler fill neck location. eventually i might at a intercooler coolant tank. i have a appointment to get it tuned on feb27 at complete street performance in west chester PA

Post Reply