Low buck exhaust. Drone at 2k

Discussion on fuel delivery & intake/exhaust tech & mods.
4flats
Posts: 15
Joined: Thu Oct 22, 2020 1:14 am

Re: Low buck exhaust. Drone at 2k

Post by 4flats » Tue Nov 24, 2020 3:02 am

So I took the measurements, Did the math and decided to buy the kit from SOLO

I spoke with the CEO and the sales guy and went with the MACH kit. The Mach shorty would have been better but I daily this car and I am really sick of noise in the cab.
Attachments
Solo.jpg
Solo.jpg (75.81 KiB) Viewed 805 times

4flats
Posts: 15
Joined: Thu Oct 22, 2020 1:14 am

Re: Low buck exhaust. Drone at 2k

Post by 4flats » Wed Jan 27, 2021 1:29 am

Follow-up: Very pleased with the exhaust system. Sometimes I wish it was louder but every morning at 4:15am I'm glad it isn't. In conclusion, don't cut off your rear mufflers, get the Solo mufflers or go full cat back. These cars need the J pipe. Un-Driveable without it.

xcidmigs
Posts: 778
Joined: Sat Feb 14, 2015 2:12 am
Location: SE PA

Re: Low buck exhaust. Drone at 2k

Post by xcidmigs » Fri Jan 29, 2021 10:10 pm

Good real world info here sir, this is why i ended up with the electric cutouts on mine can't find a 100% all the time solution... :D

Turbopowered68
Posts: 92
Joined: Thu Nov 05, 2020 1:09 am

Re: Low buck exhaust. Drone at 2k

Post by Turbopowered68 » Sat Jan 30, 2021 1:27 pm

xcidmigs wrote:
Fri Jan 29, 2021 10:10 pm
Good real world info here sir, this is why i ended up with the electric cutouts on mine can't find a 100% all the time solution... :D
at what part of the exhaust did you put the cut-outs?

I've been considering leaving the mufflers and getting rid of everything else just worried that it may get too loud.
2014 Caprice V8
Elgin E-1840 P, LS9 Head gasket, LS7 Lifters, trunion upgrade
Single roller timing set, Melling oil pump
1986 GN Roller cam, HR Rockers, Bigger turbo, XFI, E85, Front mount IC, Built trans, 3.42 gears.
1968 Chevelle LQ4, 4L80, 12 bolt w/3.42 gears

xcidmigs
Posts: 778
Joined: Sat Feb 14, 2015 2:12 am
Location: SE PA

Re: Low buck exhaust. Drone at 2k

Post by xcidmigs » Thu Feb 04, 2021 2:00 pm

Cutouts go right at the pumpkin area before the OEM mufflers so you get either stock type sound or Open

Post Reply