Yet another Brembo swap question...

Suspension, brake, and hydraulic/electric steering discussion.
Post Reply
Hvychvy
Posts: 6
Joined: Sun Oct 30, 2016 3:32 pm
Location: Tulsa, OK

Yet another Brembo swap question...

Post by Hvychvy »

I know there is a FAQ about the swap, but I couldn't find it. :roll: Anyways, I plan to use the Power Stop Z26 Street Warrior setup on my 2011, but they have the same pn as the Camaro. I read that the Camaro rotors are different due to the parking brake. Has anyone used these rotors and have had any trouble with them? I was also going to use Goodridge SS lines Thanks
s/c'd cav
Posts: 1382
Joined: Mon May 30, 2016 3:12 am
Location: PHOENIX AZ

Re: Yet another Brembo swap question...

Post by s/c'd cav »

you HAVE to use the 15-17 SS sedan rotors for the rear !!!

you would need customs brackets to use the camaro rotors , and custom made parking brake shoes , to use the camaro parts
User avatar
Mooseman
Posts: 1075
Joined: Mon Jun 12, 2017 11:35 pm
Location: Ottawa, ON Canada
Contact:

Re: Yet another Brembo swap question...

Post by Mooseman »

And for the fronts, you use the Caprice rotors. The rear you also have to cut out the dust shields so they don't rub on the SS rotors.
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Post Reply