New Caprice - Discussion forums

The worldwide owner-to-owner online support system for the Chevrolet Caprice PPV
It is currently Sat Nov 18, 2017 5:43 am

All times are UTC [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: 16 Up A-body wheels
PostPosted: Tue Sep 12, 2017 7:19 pm 
Offline

Joined: Wed Sep 06, 2017 2:31 pm
Posts: 4
Location: Concord, NH
Can you use the 2016 up A-body Camaro wheels on the Caprice? I have a line on some super cheap ones and I am tempted to grab them even though I don't have the car yet. They are 20 X 8.5 and 20 X 9.5. But I can get a set of 4 20 X 8.5's. I did check and the bolt pattern is the same. Any insight is greatly appreciated.

Chris


Top
 Profile  
 
 Post subject: Re: 16 Up A-body wheels
PostPosted: Fri Sep 15, 2017 1:04 pm 
Offline
Administration Staff

Joined: Tue Mar 19, 2013 11:30 pm
Posts: 1317
Location: Canton GA
Well...

Not sure about PPV owners, but there are some SS's with the A-body 20" Camaro wheels out there. No idea if there are clearance issues, what tire sizes are in use, or what remedies are being employed to fix any clearance issues.

Here's some info for comparison:

Stock SS sedan wheel specs:
F - 19x8.5 +48 offset
R - 19x9.0 +57 offset

Zeta Camaro wheel specs:
F - 20x8.0 +35 offset
R - 20x9.0 +40 offset

Alpha Camaro wheel specs
F - 20x8.5 +25 offset
R - 20x9.5 +39 offset

F&R - 18x8.5 +32 offset

It is a long way from a stock SS front wheel to an Alpha Camaro front wheel--21mm is nearly an inch difference on the same wheel width. Whether it clears the wheel opening or not (tire size and ride height dependent), the changes to the way load is carried into the front wheel hub/bearing alone, as well as the effect on scrub radius, makes the 2016+ front wheel a concern, at least for me.

We've well-established that the Zeta Camaro SS rear (9.0") wheel is a potential problem as far as tire rub on the rear wheel opening--again tire size and ride height dependent. The Alpha Camaro 20" rear wheel will only make the situation worse--rolling or clearancing of the rear wheel openings will be mandatory.

It may not be what you want to consider, but it IS possible to use the rear SS sedan wheel on front, with a proper spacer/adapter, and have adequate clearance without upsetting scrub radius or bearing loading nearly as much as using Alpha wheels. The 9" SS sedan rear wheel could be slightly spaced outward at the rear for improved visual appearance.

I'm not aware if any aftermarket wheel suppliers offer wheels that duplicate the OE wheel offsets with different wheel designs that may be more or equally appealing.

One option to consider with the Alpha wheels is to see how much "meat" is available on the back (mounting pad) to shave a few millimeters off to bring those wheels inward slightly. It CAN be done.

http://www.willtheyfit.com/

_________________
Bill Harper
inov8r@windstream.net


Top
 Profile  
 
 Post subject: Re: 16 Up A-body wheels
PostPosted: Wed Sep 20, 2017 1:10 pm 
Offline

Joined: Wed Sep 06, 2017 2:31 pm
Posts: 4
Location: Concord, NH
Thanks for the info.

Chris


Top
 Profile  
 
 Post subject: Re: 16 Up A-body wheels
PostPosted: Wed Sep 20, 2017 9:29 pm 
Offline

Joined: Mon May 30, 2016 8:12 am
Posts: 252
Location: phx az
ive seen the 16-17 camaro wheels on G8's also

what was done , or if they fit or not im not sure


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group