Got a set of CTS-V rims looking for parts to finish them off

Discussion on wheel & tire issues
Post Reply
Groundczero
Posts: 87
Joined: Thu Sep 20, 2018 12:52 pm

Got a set of CTS-V rims looking for parts to finish them off

Post by Groundczero » Mon Mar 29, 2021 3:59 pm

I got a set of black CTS-V rims.

The two things I am trying to make sure I do right are the following:
1. TMPS - I need 315 hrz sensors were are people sourcing them?
2. black background holden center caps trying to make sure I get the correct size, where are people getting them?

lastcall190
Posts: 580
Joined: Mon Sep 11, 2017 10:17 am
Location: North Jersey

Re: Got a set of CTS-V rims looking for parts to finish them off

Post by lastcall190 » Mon Mar 29, 2021 11:44 pm

I cant speak to the TPMS though I found four for my car from Amazon. As for the caps, best I found were four gloss black blank caps. They are a non holden size IIRC so anything holden I believe is custom. If you want I'll find the link for the blanks

-J
2012 Caprice
2008 CVPI

Both gone but not forgotten...

Groundczero
Posts: 87
Joined: Thu Sep 20, 2018 12:52 pm

Re: Got a set of CTS-V rims looking for parts to finish them off

Post by Groundczero » Tue Mar 30, 2021 6:30 pm

standard black caps that work on the cts-v rims will work.

lastcall190
Posts: 580
Joined: Mon Sep 11, 2017 10:17 am
Location: North Jersey

Re: Got a set of CTS-V rims looking for parts to finish them off

Post by lastcall190 » Tue Mar 30, 2021 10:54 pm



Let me know if that link works. They arent totally flush but if you have a gel type decal, it might span the difference.

-J
2012 Caprice
2008 CVPI

Both gone but not forgotten...

Post Reply