Staggered ISS Forged 20x10 and 20x11

Discussion on wheel & tire issues
WHEELHOUSE702
Posts: 5
Joined: Sat Sep 17, 2016 1:01 pm

Staggered ISS Forged 20x10 and 20x11

Post by WHEELHOUSE702 »

I've been in the wheel and tire business for 10 years so I knew I wanted to push the envelope. Found these on ebay. They ended up being at a dismantler in Ohio. Made a ridiculous offer and they added $100 so I jumped on them. They were off a V2 so I knew I could make them work. Temporary tires are a little small for my liking but I'm going to shave and pull the fenders and put 295s out back.
Offsets weren't available so I did the math...
Front: 20x10 +34-ish
Rear : 20x11 +58-ish
Lowered on Maverick Man G8 coilovers
Attachments
IMG_20180219_184021_075.jpg
IMG_20180219_184021_075.jpg (134.61 KiB) Viewed 19017 times
IMG_20180219_184021_077.jpg
IMG_20180219_184021_077.jpg (150.38 KiB) Viewed 19017 times
Black6
Posts: 116
Joined: Tue Jan 30, 2018 6:36 pm
Location: Indy

Re: Staggered ISS Forged 20x10 and 20x11

Post by Black6 »

You shouldn’t have to pull much, if at all. Just roll.

What size tires you going with?
Black 2014 V8

Be jealous of my factory carpet.
CrashTestDummy
Posts: 2300
Joined: Sat Feb 07, 2015 2:31 pm
Location: Pearland, Texas

Re: Staggered ISS Forged 20x10 and 20x11

Post by CrashTestDummy »

Little too ‘down in the weeds’ for my liking, but the wheels are nice.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
WHEELHOUSE702
Posts: 5
Joined: Sat Sep 17, 2016 1:01 pm

Re: Staggered ISS Forged 20x10 and 20x11

Post by WHEELHOUSE702 »

Black6 wrote:You shouldn’t have to pull much, if at all. Just roll.

What size tires you going with?
Right now they're 275/30r20 and they rubbed pretty badly until today. I shaved the fenders almost flush. Tomorrow I'm test fitting 295/30r20. May have to raise it up a touch but I'd prefer to lose the stretched look.
WHEELHOUSE702
Posts: 5
Joined: Sat Sep 17, 2016 1:01 pm

Re: Staggered ISS Forged 20x10 and 20x11

Post by WHEELHOUSE702 »

Better pic from today.
Attachments
IMG_20180221_222144_738.jpg
IMG_20180221_222144_738.jpg (1.06 MiB) Viewed 18999 times
User avatar
kevink
Posts: 480
Joined: Sun Aug 09, 2015 12:55 pm

Re: Staggered ISS Forged 20x10 and 20x11

Post by kevink »

You may have fitment issues when you fix your rear camber. Unless it's just the pic, it looks way off.
2011 9C3: 11.48 @118.
WHEELHOUSE702
Posts: 5
Joined: Sat Sep 17, 2016 1:01 pm

Re: Staggered ISS Forged 20x10 and 20x11

Post by WHEELHOUSE702 »

kevink wrote:You may have fitment issues when you fix your rear camber. Unless it's just the pic, it looks way off.
The coilovers give it camber. Not too bad though.
Maxspeed96ct
Posts: 89
Joined: Fri Jul 21, 2017 6:27 am

Re: Staggered ISS Forged 20x10 and 20x11

Post by Maxspeed96ct »

looks amazing, nice work
Gerome
Posts: 322
Joined: Sun Jan 19, 2014 7:07 pm

Re: Staggered ISS Forged 20x10 and 20x11

Post by Gerome »

I have always liked the staggered look , especially the rear . Nice .
User avatar
garrett
Posts: 33
Joined: Sat Apr 01, 2017 9:16 pm
Location: Richmond, VA

Re: Staggered ISS Forged 20x10 and 20x11

Post by garrett »

Looks great, so far some of the best fitment I've seen on these cars.
Post Reply