Hello to all and thanks for adding me to this group!
I just picked up an 2014 PPV from an auction this weekend.
45K miles/ 5,000 hours (3900 idle).
I asked on the Facebook group and wanted to post here what mods should I start with?
Ideally my center console...I prefer not to replace it totally since I do have two cup holders that came with it (in the rear of the console in between the seats) and a right elbow holder.
New to the group and owner of an 2014 PPV
Forum rules
Welcome to the system! If you're a new member we'd suggest making a first post here so that the members know you're alive & on-board!
Welcome to the system! If you're a new member we'd suggest making a first post here so that the members know you're alive & on-board!
New to the group and owner of an 2014 PPV
- Attachments
-
- AP0000052059-07.jpg (125.49 KiB) Viewed 125 times
-
- IMG_0698.JPG (237.92 KiB) Viewed 125 times
-
Turbopowered68
- Posts: 79
- Joined: Thu Nov 05, 2020 1:09 am
Re: New to the group and owner of an 2014 PPV
Great looking car.
I made my own console - Kept the cop console base and also used the cup holders.
I made my own console - Kept the cop console base and also used the cup holders.
2014 Caprice V8
Elgin E-1840 P, LS9 Head gasket, LS7 Lifters, trunion upgrade
Single roller timing set, Melling oil pump
1986 GN Roller cam, HR Rockers, Bigger turbo, XFI, E85, Front mount IC, Built trans, 3.42 gears.
1968 Chevelle LQ4, 4L80, 12 bolt w/3.42 gears
Elgin E-1840 P, LS9 Head gasket, LS7 Lifters, trunion upgrade
Single roller timing set, Melling oil pump
1986 GN Roller cam, HR Rockers, Bigger turbo, XFI, E85, Front mount IC, Built trans, 3.42 gears.
1968 Chevelle LQ4, 4L80, 12 bolt w/3.42 gears
Re: New to the group and owner of an 2014 PPV
Thanks, I plan to do the same for the center console. Any tips on what you did are appreciated.