Rear windows not working at all on 2011 PPV 9C1
-
- Posts: 2301
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: Rear windows not working at all on 2011 PPV 9C1
Sorry, I just reread your original post, word-for-word, and see where I first though you wrote 'it works from the driver's controls...' you really wrote 'doesn't even work from the driver's controls....' or something like that. That removes the floor connector and the child switch on the back of the door, so yes, it looks like you're down to chasing wires.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Re: Rear windows not working at all on 2011 PPV 9C1
Although I don't have the schematics and I haven't worked on this car much yet, if it's like any other modern GM vehicle, it's all controlled by the BCM, which then controls relays to control the window motors. Or it's all controlled by the DDM. Either way, for both windows to fail to work, I'd say it's a power issue to those doors if they're on a common circuit.
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419