Page 1 of 1

Missing overhead console hardware

Posted: Mon Aug 14, 2017 2:28 pm
by philofab
What's missing here? There is a spot for 4 screws but only one does anything. The other three apear to be missing clips or bushings:

Re: Missing overhead console hardware

Posted: Mon Aug 14, 2017 2:30 pm
by philofab
Oops. My phone uploaded in a high res... I will try to edit it.

Re: Missing overhead console hardware

Posted: Mon Aug 14, 2017 2:33 pm
by philofab
Lower res photo

Re: Missing overhead console hardware

Posted: Mon Aug 14, 2017 7:46 pm
by smwalker
Missing the dome light assembly and sunglass holder. I upgraded mine to a black one with map lights but you can get a tan one with map lights as well from AU or maybe the SS

Image

Some extra wiring needed for the map lights to work:

WM Statesman Map Light Wiring

Tan one:
Image

Re: Missing overhead console hardware

Posted: Mon Aug 14, 2017 8:18 pm
by philofab
I have it. I took it off because it was making a horrible rattling noise. The plastic bracket pictured was missing 4 screws and 3 of some sort of square plastic washer.

I ended up using 4 new screws and 3 small fender washers to attach it and eliminate the noise.

Re: Missing overhead console hardware

Posted: Mon Aug 14, 2017 8:49 pm
by smwalker
Oh yes I see what you mean now. Yes they are plastic square washers. DO what works.

Re: Missing overhead console hardware

Posted: Tue Aug 15, 2017 1:08 am
by s/c'd cav
i need a tan one with the sunglass holder

i do have a black one with the sunglass holder , one with the sunroof dial , non-map light with sunroof dial , and 1 tan with the sunroof switches

i did put the rear SS dome with reading lights in my 14 , but the reading lights need to be wired in , also swapping the 14-17 front over head with a SS requires rewiring and a new plug , the SS uses a 6pin rectangular plug , and the ppv is a single row flat plug