Page 1 of 1

2011 9c3 bucket seat back panel

Posted: Wed Jan 31, 2018 7:37 pm
by Craig2011
How do you remove the plastic back panel on a 2011 9c3 bucket seat? I need to get it off without breaking it.

Re: 2011 9c3 bucket seat back panel

Posted: Wed Jan 31, 2018 7:39 pm
by smwalker
If I remember correctly there are two Christmas tree type clips (2) at the bottom that you just pull on the bottom to release. then there are arms that tuck into the seat frame along the top so do not pull along the top. Pull bottom first then slide the top down and out.

Re: 2011 9c3 bucket seat back panel

Posted: Thu Feb 01, 2018 8:55 am
by Craig2011
Thanks for the fast reply. I will try that today.

Re: 2011 9c3 bucket seat back panel

Posted: Mon Feb 05, 2018 10:30 pm
by Craig2011
Just like you said. 2 Christmas tree clips at the bottom. They were in there really good.

Re: 2011 9c3 bucket seat back panel

Posted: Sun Sep 09, 2018 7:50 pm
by CapriceBTR1
I'm a new member. A lot of auction cars and even some for sale online are missing the drivers plastic seat back and sometimes the passenger side as well. Any idea why these are removed? Are they bulletproof or something? Thanks in advance for your help.

Re: 2011 9c3 bucket seat back panel

Posted: Mon Sep 10, 2018 9:03 pm
by smwalker
THey may have interfered with the prisoner partition in some way, or the 6'5" cops found they could get an extra inch in the front seat leg room if they removed them. All I can think of.