Splitter, anyone?
Re: Splitter, anyone?
I would be more intereste din the fog light bezel...
2012 Black PPV beater
2011 Hugo pro-charged sleeper
2011 Hugo pro-charged sleeper
-
- Administration Staff
- Posts: 1724
- Joined: Tue Mar 19, 2013 6:30 pm
- Location: Canton GA
Re: Splitter, anyone?
photo of the PPV on track - splitter adds visual balance by extending front end - not so easy to see in this picture
- Attachments
-
- at ISSCA Nationals 2018 Norwalk OH
- PPV ISSCA AutoX 2018.jpg (4.27 MiB) Viewed 9685 times
Bill Harper
inov8r@windstream.net
inov8r@windstream.net
-
- Posts: 2301
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: Splitter, anyone?
That looks nice, Bill. How did you do there?
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
-
- Administration Staff
- Posts: 1724
- Joined: Tue Mar 19, 2013 6:30 pm
- Location: Canton GA
Re: Splitter, anyone?
full disclosure--I was not the driver. Ed Runnion was there with a cheesy rental car, and I suggested he just drive the PPV, which he did.
Not prepped, no air pressure adjustments from my standard settings, using Conti DSW all-season tires (255/45-18). Wasn't slowest, but far from fastest, but many/most faster had much more prep, power, etc.
Not prepped, no air pressure adjustments from my standard settings, using Conti DSW all-season tires (255/45-18). Wasn't slowest, but far from fastest, but many/most faster had much more prep, power, etc.
Bill Harper
inov8r@windstream.net
inov8r@windstream.net
-
- Posts: 2301
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: Splitter, anyone?
Wow! Tiny world!! I know Ed. He's a good guy, and a great driver. He's been to Nationals many more times than we have. He used to live in Houston, where he got his 96 SS. We were members of HAIL (Houston Area Impala Lovers) club together.
And yeah, when you show up with an underdog, it's fun to see just who you can beat! That's usually what we do when we take the Tahoe or the Caprice to an event instead of our Firebird.
And yeah, when you show up with an underdog, it's fun to see just who you can beat! That's usually what we do when we take the Tahoe or the Caprice to an event instead of our Firebird.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Re: Splitter, anyone?
I clicked the link, nothing showed up. Ive been thinking about splitters that would work too lol how much is a splitter? I dont think id need 1 with the bracing if its not "on us"
-
- Administration Staff
- Posts: 1724
- Joined: Tue Mar 19, 2013 6:30 pm
- Location: Canton GA
Re: Splitter, anyone?
interesting timing juncture--we're in the process of getting material TODAY to see if the one-off can become a part available for others--it would be of a lesser material than this "one-off", but also at a lower total cost. Nothing more to report until material is in hand and it's characteristics and workability have been evaluated.
Progress!
Progress!
Bill Harper
inov8r@windstream.net
inov8r@windstream.net
Re: Splitter, anyone?
That is progress. Glad to see that this is still in the works. I'm still thinking about getting one.
Maurice
Maurice
Maurice Sheil
mhsheil@gmail.com
2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
mhsheil@gmail.com
2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
-
- Posts: 2301
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: Splitter, anyone?
+1!
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
-
- Administration Staff
- Posts: 1724
- Joined: Tue Mar 19, 2013 6:30 pm
- Location: Canton GA
Re: Splitter, anyone?
So today, we took a piece of material and roughed it out to figure what is going to be the best approach to cutting the final shape. This first part (the black plastic piece with white tape on it) will be the part used to make all production parts. The material being used for this initial run is High Molecular Weight Poly something sheet, approximately 0.375" thick. It does NOT have a composite fiber outer surface like the original part in the picture--but any graphics shop or skilled person should be able to put a "wrap" on the part to give it any look desired, including carbon fiber.
At present, we've got enough material on hand to make 5 splitters over & above what is shown here. First task is to prove it will work & fit like the original....the part with the blue tape all over it. Demand will dictate making more.
Can't identify a complete kit cost at this point, but it will include the mounting hardware and the front wheel opening "spats" that tie into the splitter.
At present, we've got enough material on hand to make 5 splitters over & above what is shown here. First task is to prove it will work & fit like the original....the part with the blue tape all over it. Demand will dictate making more.
Can't identify a complete kit cost at this point, but it will include the mounting hardware and the front wheel opening "spats" that tie into the splitter.
Bill Harper
inov8r@windstream.net
inov8r@windstream.net