Brand of push bar
Re: Brand of push bar
I looked it up, it’s amazing the cost difference, EBay $533, mechanics supply $125. It’s a good looking push bar.
2014 Caprice PPV silver
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.
-
- Posts: 37
- Joined: Thu May 18, 2017 1:05 pm
- Location: Jacksonville FL
Re: Brand of push bar
You have to shop around, Amazon is where I got mine for around $130
2012 PC3 Caprice
3.6 LFX V6 w/ over 200k miles *SOLD* @250,000 Miles.
2013 9C1 Caprice
3.6 LFX V6 with 80k miles
"Dispatch, show me on a traffic stop."
"Uh you can disregard, I pulled the guy that pays my salary, got to let him go."
3.6 LFX V6 w/ over 200k miles *SOLD* @250,000 Miles.
2013 9C1 Caprice
3.6 LFX V6 with 80k miles
"Dispatch, show me on a traffic stop."
"Uh you can disregard, I pulled the guy that pays my salary, got to let him go."
Re: Brand of push bar
brewerb258 wrote:You have to shop around, Amazon is where I got mine for around $130
How would you say the quality is? Yea I would buy from amazon also.
2014 Caprice PPV silver
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.
Re: Brand of push bar
Go Rhino is out of TX, I'm very happy with mine. Granted it doesn't have the welded center bar. Very very sturdy. Only modification is a slight cut to the plastic piece under the headlamp, which doesn't affect its functionality at all. Obviously can get it without the wraparound bars as well.
Holes in my bumper courtesy of WSP. They use Setina.
Holes in my bumper courtesy of WSP. They use Setina.
- Attachments
-
- InShot_20180423_181557646_1_900x920.jpg (698.25 KiB) Viewed 7534 times
13 Caprice 6.0L, Solo catback exhaust, 3.27 diff, VCM OTR and Volant throttle spacer, MSD coils plugs wires, transmission pan upgrade and widemouth filter. Camaro 18" rims.
Active Duty USAF
Active Duty USAF
Re: Brand of push bar
Go Rhino and Go industries are 2 different companys as far as I've seen. Ive had a go rhino on an old caprice, they are nice, pricey though,
2014 Caprice PPV silver
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.
-
- Posts: 37
- Joined: Thu May 18, 2017 1:05 pm
- Location: Jacksonville FL
Re: Brand of push bar
I would say it is the same quality as go rhino. It's solid and holds up well.No Moa wrote:brewerb258 wrote:You have to shop around, Amazon is where I got mine for around $130
How would you say the quality is? Yea I would buy from amazon also.
I think it looks better with wheel covers
- Attachments
-
- rsz_img_2083.jpg (79.38 KiB) Viewed 7521 times
2012 PC3 Caprice
3.6 LFX V6 w/ over 200k miles *SOLD* @250,000 Miles.
2013 9C1 Caprice
3.6 LFX V6 with 80k miles
"Dispatch, show me on a traffic stop."
"Uh you can disregard, I pulled the guy that pays my salary, got to let him go."
3.6 LFX V6 w/ over 200k miles *SOLD* @250,000 Miles.
2013 9C1 Caprice
3.6 LFX V6 with 80k miles
"Dispatch, show me on a traffic stop."
"Uh you can disregard, I pulled the guy that pays my salary, got to let him go."
Re: Brand of push bar
I do like those wheel covers! I may do that down the road
2014 Caprice PPV silver
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.