Finally Tinted
Re: Finally Tinted
These headlights lenses don't come off? Almost all the newer cars I've seen now have the clear part as removable, using something like butyl rubber to seal which actually comes off pretty well and is easily replaceable, HD sells a nice roll of it for like $6 DId you have some strobe lighting holes put into yours?
-
- Posts: 604
- Joined: Mon Sep 11, 2017 5:17 am
- Location: North Jersey
Re: Finally Tinted
I would attempt to bake them and remove the lenses... but considering the cost of replacement lights if I muff it up, I'd rather have a spare before trying it. I noticed that when you look into the light from the backside, there are lots of small torx screws that almost seem that when removed, would allow a LOT of access to get maybe a small hand in there to clean them. If nothing else, I now see how damn easy it is to remove them once the bumper is off.
No holes from strobes but almost seems that the lens was burnt from the lights being on so much...? Difficult to describe without a pic.
The condensation issue was probably because of me being a dumbass as well as the highbeam bulb cover off for a long time (decided to take a nap at the bottom of the fender well for a few years).
No holes from strobes but almost seems that the lens was burnt from the lights being on so much...? Difficult to describe without a pic.
The condensation issue was probably because of me being a dumbass as well as the highbeam bulb cover off for a long time (decided to take a nap at the bottom of the fender well for a few years).
2012 Caprice
2008 CVPI
Both gone but not forgotten...
2008 CVPI
Both gone but not forgotten...