Inner door panel same as G8?

Discussion on body issues/mods, appearance, interior/trim, and detailing (i.e. how to keep your car looking showroom new, or a reasonable facsimile thereof...).
Post Reply
Yuckydog
Posts: 51
Joined: Wed Jul 10, 2019 6:51 pm
Location: Holly Springs, GA

Inner door panel same as G8?

Post by Yuckydog »

I'm still hunting for a driver interior door panel (specifically only need the arm rest/handle) for my 9c3 and was told that this is the same as the G8 part. Can someone confirm?

Thanks,
James
smwalker
Administration Staff
Posts: 2203
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: Inner door panel same as G8?

Post by smwalker »

The G8 front would fit but it would have a 9C3 style armrest. Meaning no hole for window switch. SO if you had a 9C3 that would work. 9C1 not so much.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Pursuit
Administration Staff
Posts: 969
Joined: Tue Apr 23, 2013 3:39 pm
Location: Omaha, NE area

Re: Inner door panel same as G8?

Post by Pursuit »

Yucky Dog,
I found a TOTALED 2008 G8 GT. The driver's side door was broken but I did try to liberate the armrest/pull handle. I removed 6-7 screws from the door cavity side. But, the armrest is still retained by several plastic welds. So, I could not retrieve it... Keep that in mind when looking for an armrest/pull handle.

Maurice
Maurice Sheil

mhsheil@gmail.com

2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
Post Reply