taking the IQ radio apart and soldering the 20 pin connector
-
- Posts: 7
- Joined: Thu Jun 25, 2020 6:58 pm
Re: taking the IQ radio apart and soldering the 20 pin connector
Please help! Where can I get the grey reverse camera input plug on drivers side of radio from?
Re: taking the IQ radio apart and soldering the 20 pin connector
I think what you are describing on the drivers side is the USB plug. The video input for the Rear camera is a 20 pin connector on the passenger side. I sell them to $35 as long as you have the plug present (most 13's did not get the plug so you have to solder leads)
-
- Posts: 7
- Joined: Thu Jun 25, 2020 6:58 pm
Re: taking the IQ radio apart and soldering the 20 pin connector
Good afternoon everybody! My 2013 Caprice is giving me the biggest headache installing the USB port for my phone. See some of y’all on YouTube got it figured out. I can’t get it. Got a soldering iron and damn near blew up the green board inside the radio but got the back up camera to work. Does anybody know what plug is on the driver side that makes the USB work?
Re: taking the IQ radio apart and soldering the 20 pin connector
Here it is here with a USB cable plugged in. This is on the drivers side of the radio
-
- Posts: 7
- Joined: Thu Jun 25, 2020 6:58 pm
Re: taking the IQ radio apart and soldering the 20 pin connector
What are my options? I want to plug my radio to my phone.
-
- Posts: 7
- Joined: Thu Jun 25, 2020 6:58 pm
Re: taking the IQ radio apart and soldering the 20 pin connector
You are the man Steve! Thank you!
Re: taking the IQ radio apart and soldering the 20 pin connector
Well first off what Kind of phone yo have Apple or Android?Outlaw9986 wrote: ↑Fri Aug 14, 2020 1:56 pm What are my options? I want to plug my radio to my phone.
Kinda only compatable with apple.
But you can build your own USB Cord or get 2 from GM and a receptacle. Or I make up the USB and AUX in cords you need for $45 but also need a GM receptacle. I mentioned somewhere else on this board that you can get a cord for a Peugeot 307 but someone got one and it did not work well. Not sure if that was a one off thing (shoty China manufacturing) or if they actually are wired differently than ours. Have not had another opportunity to check one out.