taking the IQ radio apart and soldering the 20 pin connector

Electronic systems, stereo and Holden iQ, wiring, it all goes here....
Outlaw9986
Posts: 7
Joined: Thu Jun 25, 2020 6:58 pm

Re: taking the IQ radio apart and soldering the 20 pin connector

Post by Outlaw9986 »

Please help! Where can I get the grey reverse camera input plug on drivers side of radio from?
smwalker
Administration Staff
Posts: 2205
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: taking the IQ radio apart and soldering the 20 pin connector

Post by smwalker »

I think what you are describing on the drivers side is the USB plug. The video input for the Rear camera is a 20 pin connector on the passenger side. I sell them to $35 as long as you have the plug present (most 13's did not get the plug so you have to solder leads)
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Outlaw9986
Posts: 7
Joined: Thu Jun 25, 2020 6:58 pm

Re: taking the IQ radio apart and soldering the 20 pin connector

Post by Outlaw9986 »

Good afternoon everybody! My 2013 Caprice is giving me the biggest headache installing the USB port for my phone. See some of y’all on YouTube got it figured out. I can’t get it. Got a soldering iron and damn near blew up the green board inside the radio but got the back up camera to work. Does anybody know what plug is on the driver side that makes the USB work?
smwalker
Administration Staff
Posts: 2205
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: taking the IQ radio apart and soldering the 20 pin connector

Post by smwalker »

Here it is here with a USB cable plugged in. This is on the drivers side of the radio

Image
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Outlaw9986
Posts: 7
Joined: Thu Jun 25, 2020 6:58 pm

Re: taking the IQ radio apart and soldering the 20 pin connector

Post by Outlaw9986 »

What are my options? I want to plug my radio to my phone.
Outlaw9986
Posts: 7
Joined: Thu Jun 25, 2020 6:58 pm

Re: taking the IQ radio apart and soldering the 20 pin connector

Post by Outlaw9986 »

You are the man Steve! Thank you!
smwalker
Administration Staff
Posts: 2205
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: taking the IQ radio apart and soldering the 20 pin connector

Post by smwalker »

Outlaw9986 wrote: Fri Aug 14, 2020 1:56 pm What are my options? I want to plug my radio to my phone.
Well first off what Kind of phone yo have Apple or Android?
Kinda only compatable with apple.

But you can build your own USB Cord or get 2 from GM and a receptacle. Or I make up the USB and AUX in cords you need for $45 but also need a GM receptacle. I mentioned somewhere else on this board that you can get a cord for a Peugeot 307 but someone got one and it did not work well. Not sure if that was a one off thing (shoty China manufacturing) or if they actually are wired differently than ours. Have not had another opportunity to check one out.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Post Reply