Anyone have the pinouts for the 9C3 stabilitrak/trunk switch

Electronic systems, stereo and Holden iQ, wiring, it all goes here....
Post Reply
gregc
Posts: 233
Joined: Tue Mar 19, 2013 7:13 pm

Anyone have the pinouts for the 9C3 stabilitrak/trunk switch

Post by gregc »

I'm converting my 9C1 to a 9C3 console but I need to know what wires go into the 8 pin connector on the switch. Any help would be appreciated.
gregc
Posts: 233
Joined: Tue Mar 19, 2013 7:13 pm

Re: Anyone have the pinouts for the 9C3 stabilitrak/trunk sw

Post by gregc »

got it figured out.

pin 1 is illumination, pin 2 is ground, pin 3 is stabilitrak and pin 5 is trunk release
Post Reply