Code P0570

Electronic systems, stereo and Holden iQ, wiring, it all goes here....
Post Reply
shawnjon82
Posts: 159
Joined: Sat Mar 02, 2019 8:18 pm

Code P0570

Post by shawnjon82 »

Has anybody dealt with this code before if so what is the fix?
Attachments
4643FFB4-6176-451B-B410-96DA97FB7771.jpeg
4643FFB4-6176-451B-B410-96DA97FB7771.jpeg (4 MiB) Viewed 3908 times
User avatar
rcg530
Posts: 118
Joined: Wed Jan 29, 2020 6:42 pm
Location: Sacramento, CA
Contact:

Re: Code P0570

Post by rcg530 »

It looks like the DTC is P057D not P0570. ("D" vs "0").

The possible causes listed on the autocodes.com website are: https://www.autocodes.com/p057d_chevrolet.html

Brake Pedal Position Sensor Calibration Faulty
Brake Pedal Position Sensor
Brake Pedal Position Sensor harness is open or shorted
Brake Pedal Position Sensor circuit poor electrical connection
Faulty Starter Generator Control Module

I don't know what year Caprice you have, but on my 2014 Caprice after I reprogrammed the body control module (BCM), I had to execute the BCM special function to get the brake pedal position relearned.

The P057C (the "low" voltage version of this DTC) has a similar list of potential sources. It could be as simple as a faulty brake pedal switch (position sensor) on the brake pedal.

From the parts charts, the 2014-2017 Caprices have a position sensor with GM part number 13597422.

The 2011-2013 Caprices use brake pedal position sensor GM part number 20995840.
2014 Chevy Caprice PPV | RetroCarGuy530 YouTube Channel
shawnjon82
Posts: 159
Joined: Sat Mar 02, 2019 8:18 pm

Re: Code P0570

Post by shawnjon82 »

Thanks for the info and your time. It’s a 2014 and did you post a video of how to execute the BCM special function process on your you tube channel?
smwalker
Administration Staff
Posts: 2205
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: Code P0570

Post by smwalker »

He did Shawn, need the scanner capable of doing it but it's here:

https://youtu.be/1AB_Hu9wT38?t=1450
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
User avatar
rcg530
Posts: 118
Joined: Wed Jan 29, 2020 6:42 pm
Location: Sacramento, CA
Contact:

Re: Code P0570

Post by rcg530 »

Thanks Steve for posting the link to my BCM update video.

The relearn / scan tool steps start at the 24:09 time mark in the video. After updating the BCM, the DTC C0278-4B "Brake pedal position sensor - Calibration not learned" is present in the "Electronic brake control module" (ABS). I use the scan tool's special function access within the BCM to execute the "Brake pedal position sensor learn" function. It takes about 30 seconds to get into the special function and invoke the learn process. When I check the "Electronic brake control module" DTCs again, it still has the C0278-4B code, but now it's only a "history" code instead of an active code. I'm able to clear that DTC and the issue is resolved.
2014 Chevy Caprice PPV | RetroCarGuy530 YouTube Channel
Post Reply