Big Single TURBO build ...LOADING

Tell us about your new PPV, show us some pictures, let us know how you did what you did!
Forum rules
One thread per car per member in this section. No thread hijacking in this section please, if it's strictly a tech discussion please move it to the appropriate sub-forum - moderators can assist if needed or requested.
User avatar
kevink
Posts: 480
Joined: Sun Aug 09, 2015 12:55 pm

Re: Big Single TURBO build ...LOADING

Post by kevink »

The Jegs wheels actually fit with nothing other than G8 V6 rotors and calipers. They are the wrong bolt pattern, though, but it doesn't ever seem to be a problem for anyone.
2011 9C3: 11.48 @118.
Tansman
Posts: 95
Joined: Tue Dec 20, 2016 6:34 pm

Re: Big Single TURBO build ...LOADING

Post by Tansman »

Finally got it done! Here's what to expect if you do the jegs 15in conversion. Not including tires I have about $320 invested in the conversion. All that is required is
Wheels
Rotors
Caliper brackets
Lug nuts
And some minor grinding!

https://youtu.be/v8X-nw9o3Tg
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)
Tansman
Posts: 95
Joined: Tue Dec 20, 2016 6:34 pm

Re: Big Single TURBO build ...LOADING

Post by Tansman »

Blacking out some stuff this weekend with vivid vinyl tint. This stuff wasn't easy 😆 I had to order another roll for the other light because I messed up so many times on the first one.
Attachments
Capture+_2020-02-10-08-31-05.png
Capture+_2020-02-10-08-31-05.png (2.32 MiB) Viewed 6950 times
Capture+_2020-02-10-08-30-26.png
Capture+_2020-02-10-08-30-26.png (1.37 MiB) Viewed 6950 times
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)
User avatar
The Tech
Posts: 283
Joined: Tue Mar 19, 2013 9:34 pm
Location: Mooresville NC

Re: Big Single TURBO build ...LOADING

Post by The Tech »

I don't think the welds look that bad ... :D
2011 Alto Gray Caprice PPV 9C3, Kooks Long Tube Headers, Kooks Drag Cats and Crossover, Solo Axle Back System.
1996 DGGM Impala SS
1995 Caprice 9C1 red over white
2015 Bright Yellow Jeep Wrangler, the better half's car.
Member of Carolina Holdens
User avatar
Brokecello
Posts: 14
Joined: Sun Oct 06, 2013 10:30 pm

Re: Big Single TURBO build ...LOADING

Post by Brokecello »

Nice welds! Lol! :-)
-- 2014 Caprice 9C1 - Retired Washington County (OR) Sheriff Dept Unit
-- 2014 Caprice 9C1 - Retired NC Dept of Corrections Prisoner Transport
Post Reply