Big Single TURBO build ...LOADING

Tell us about your new PPV, show us some pictures, let us know how you did what you did!
Forum rules
One thread per car per member in this section. No thread hijacking in this section please, if it's strictly a tech discussion please move it to the appropriate sub-forum - moderators can assist if needed or requested.
Tansman
Posts: 74
Joined: Wed Dec 21, 2016 12:34 am

Re: Big Single TURBO build ...LOADING

Post by Tansman » Thu Jan 10, 2019 2:07 pm

I started the cam swap and found the timing chain to be completely destroyed! I'm glad it was though, otherwise I wouldn't have known to upgrade it to an LS2 chain and tensioner. I'm sure it was probably cutting off some oil flow too!
Attachments
Tensioner oil tube.jpg
Tensioner oil tube.jpg (1.03 MiB) Viewed 1181 times
chain tensioner.jpg
chain tensioner.jpg (1.17 MiB) Viewed 1181 times
chain tensioner bits.jpg
chain tensioner bits.jpg (1.44 MiB) Viewed 1181 times

Tansman
Posts: 74
Joined: Wed Dec 21, 2016 12:34 am

Re: Big Single TURBO build ...LOADING

Post by Tansman » Thu Jan 10, 2019 2:11 pm

Here's a couple pictures from the cam swap. honestly it was all super easy for being my first time tearing into a motor. I also used an ICT valley cover. Also not noted before I also installed
BTR 7.425 pushrods and BTR Platinum dual spring kit with titanium retainers.
Attachments
head studs.jpg
head studs.jpg (2.25 MiB) Viewed 1181 times
no head.jpg
no head.jpg (2.21 MiB) Viewed 1181 times

Tansman
Posts: 74
Joined: Wed Dec 21, 2016 12:34 am

Re: Big Single TURBO build ...LOADING

Post by Tansman » Thu Jan 10, 2019 2:13 pm

So with all of that, That is where I am at in the build right now! Cam is in and running. I have a couple vacuum leaks to track down I think. And I am getting ready to start on the hotside soon! once I sell my VCM intake and my headers so i can buy a MIG.

lastcall190
Posts: 325
Joined: Mon Sep 11, 2017 10:17 am
Location: North Jersey

Re: Big Single TURBO build ...LOADING

Post by lastcall190 » Thu Jan 10, 2019 2:30 pm

Good looking build, thanks for giving me a thread to read on a slow work morning!

-J
2012 Caprice
!DOD : LS9 Cam : Pat G : Magnaflow : VCM

2008 CVPI
168k and going strong

User avatar
Mooseman
Posts: 354
Joined: Tue Jun 13, 2017 4:35 am
Location: Ottawa, ON Canada
Contact:

Re: Big Single TURBO build ...LOADING

Post by Mooseman » Thu Jan 10, 2019 3:06 pm

Damn, lots of nice work. I should have waited before receiving 20+ email notifications!

Solid build so far. And still a gorgeous car.
2011 Caprice PPV, 1 of possibly 4 in Canada!
Image

CrashTestDummy
Posts: 1871
Joined: Sat Feb 07, 2015 8:31 pm
Location: Pearland, Texas

Re: Big Single TURBO build ...LOADING

Post by CrashTestDummy » Thu Jan 10, 2019 6:32 pm

Wow, I had no idea the chain tensioners could shatter like that! Kind of like the old GM plastic-wrapped cam gears. :cry:
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2010 Tahoe PPV (her car)
1995 DGGM Impala SS
1996 BBB Impala SS (11-second DD)
1985 Firebird - 310 LS1 C Prepared autocross car.
And some others
Do YOU have my SPID?

sar94
Posts: 8
Joined: Fri Jan 04, 2019 2:29 am

Re: Big Single TURBO build ...LOADING

Post by sar94 » Fri Jan 11, 2019 1:24 am

Great build. I'm looking forward to the turbo layout. What are you using for manifolds? Thanks for posting, this is exactly what I want build. I'm going to pick up a 2012 Saturday.

Tansman
Posts: 74
Joined: Wed Dec 21, 2016 12:34 am

Re: Big Single TURBO build ...LOADING

Post by Tansman » Fri Jan 11, 2019 4:44 am

sar94 wrote:
Fri Jan 11, 2019 1:24 am
What are you using for manifolds?
I'm going to use the stock manifolds, and cut and butcher them however needed. Stock manifolds have proven to be good on turbo builds well past 1000hp! I'm going to run 2.25 split hotside, into the divided flange

User avatar
HoldenPPV
Posts: 62
Joined: Sun Mar 18, 2018 6:17 am
Location: Pacific Northwest

Re: Big Single TURBO build ...LOADING

Post by HoldenPPV » Mon Jan 14, 2019 8:31 pm

Great horse trading and getting stuff done on the cheap. I love reading these kind of builds...
2012 9C1 (L77)

2008 Suzuki B-King - 2nd gen 1340cc Hayabusa engine - Scorpion exhaust
* (Bequeathed to me by Chris Hibbard 11/11/1958-01/08/2011 — The HibbsCycle) *

#ABG (Always Be Gamblin’) http://www.Gambler500.com" an impractical vehicle-off road-navigational challenge...

Tansman
Posts: 74
Joined: Wed Dec 21, 2016 12:34 am

Re: Big Single TURBO build ...LOADING

Post by Tansman » Sat Jan 19, 2019 10:15 pm

Found the Dyno sheet.
This was with intake, headers, exhaust, under drive pulley, on 91 pump.
Attachments
20190119_151157.jpg
20190119_151157.jpg (2.87 MiB) Viewed 1070 times

Post Reply