New Caprice - Discussion forums

CrashTestDummy wrote: ↑Mon May 13, 2019 12:08 pm I'm surprised the rear tires don't light up every time you open the trunk with all those stickers!

So am I!

I had to pull it out of the garage so I figured I'd get a picture. Seats are out to run the meth injection wires. If you're on the Facebook page I posted an idle video!

Sounded great on facebook..keep at it you are almost there.

Finally got the meth line ran to the front, mounted the pump in the spare tire well.

Trunk looks clean again!

I had the down pipe off to weld my o2 on, so I painted it gloss black with some hightemp paint. It looks a little more stealth now .

I plan to wrap this too up to right before it comes out of the fender.

I put the meth nozzle in the silicone 90 before the throttle body. I used this piece from Amazon and flap disked it down until it was as thin as I could get it so the nozzle would be exposed and hopefully be able to have a good straight spray into the TB.

Blow off valve flange is welded onto the 4in spectre pipe. I put it about 6in or so before the maf. I read that's about the best placement for it.

The turbo outlet has a leg coming off it now, this was the last piece I needed to fully connect the coldside!

I'm doing an IAT breakout so the IAT will be after the methanol nozzle. Its going into the short tube right in front of the TB. I wanted it in the intake but I don't know where people usually put these. So this should work!

Nice work. I have GOT to learn how to TIG!