2014 Caprice PPV - YouTube Project Car
Forum rules
One thread per car per member in this section. No thread hijacking in this section please, if it's strictly a tech discussion please move it to the appropriate sub-forum - moderators can assist if needed or requested.
One thread per car per member in this section. No thread hijacking in this section please, if it's strictly a tech discussion please move it to the appropriate sub-forum - moderators can assist if needed or requested.
Re: 2014 Caprice PPV - YouTube Project Car
Nice. Did you check the ECU's programming? Do you see an SGT RPO option on your sticker? That option is to limit it to under 100 MPH. I guess they don't trust Sgts to drive too fast
What did you use for the programming interface? Tech 2? MDI?
What did you use for the programming interface? Tech 2? MDI?
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Re: 2014 Caprice PPV - YouTube Project Car
I do have RPO code SGT listed on my SPID sticker. Looking that up for the 2014-2017 it appears to be a speed limiter of 130 MPH. I don't envision driving my Caprice above 130 at this time.
I used a MDI device to act as the J2534 programming interface for SPS.
2014 Chevy Caprice PPV | RetroCarGuy530 YouTube Channel
Re: 2014 Caprice PPV - YouTube Project Car
G`day mate, i noticed you only have a single piston caliper on this vehicle....
It looks weird as im from australia and all caprice vehicles have twin piston setups...
Just wondering what the rotors were worth? We get stooged here for that kind of gear
It looks weird as im from australia and all caprice vehicles have twin piston setups...
Just wondering what the rotors were worth? We get stooged here for that kind of gear
2012 holden caprice v
1986 vl berlina turbo bt1
2001 toyota echo!!!!!!!!!!!!
1986 vl berlina turbo bt1
2001 toyota echo!!!!!!!!!!!!
Re: 2014 Caprice PPV - YouTube Project Car
As far as I know, all of the North American Chevy Caprices have the single piston calipers. I don't really have a enough money in my project budget to completely rework the brakes with Brembos.
The stock rotors were shot (not worth machining them for reuse on the car). I've had good luck and performance using the Power Stop drilled/slotted brake rotors on my Chevy SSR pickup. I just wanted to get my Caprice freshened up with new rotors/pads. After replacing the rotors, pads and bleeding/flushing the brake system, the brakes now perform well on this car. They're not like the Brembo brakes I had on my former Chevy SS Sedan, but they work well enough for my needs.
2014 Chevy Caprice PPV | RetroCarGuy530 YouTube Channel
Re: 2014 Caprice PPV - YouTube Project Car
Thats good mate, i have standard rotors on mine with bendix pads....thet stop really well for what i need. The HSV brake upgrade is about 2k here...and eberytime we need rotors and pads theyre worth around $1200...but expensive for my liking
2012 holden caprice v
1986 vl berlina turbo bt1
2001 toyota echo!!!!!!!!!!!!
1986 vl berlina turbo bt1
2001 toyota echo!!!!!!!!!!!!
Project Status Update - 5/3/2020
I have replaced a noisy alternator, installed a locking gas cap that uses my car's blade key and I've replaced the flat metal style engine oil dipstick with a cable style dipstick.
https://www.youtube.com/watch?v=DPcwYsc63mg
https://www.youtube.com/watch?v=DPcwYsc63mg
2014 Chevy Caprice PPV | RetroCarGuy530 YouTube Channel
Re: 2014 Caprice PPV - YouTube Project Car
DO no think anyone has found that locking gas cap yet for our cars. Good Find!
Re: 2014 Caprice PPV - YouTube Project Car
the gas cap shows to be for a 11-15 camaro , list price is 105.36
kinda spendy , but good idea , as long as the seal stays good
kinda spendy , but good idea , as long as the seal stays good
Re: 2014 Caprice PPV - YouTube Project Car
As I mentioned in the video, the part listing won't show the Caprice nor the Chevy SS Sedan. I first heard of the ACDelco GT344 being installed on a 5th gen Camaro back when I had a 2010 Camaro 1SS. The Camaro, 14-17 Caprice and SS Sedan all have a center cut blade keys and they have the same size fuel filler opening. I used the GT344 on both Chevy SS Sedans I owned (2015 and 2017) and had zero problems using that gas cap on those cars.
The ACDelco GT344 can be purchased for around $50 US from places like RockAuto.com. Still not the cheapest locking gas cap, but at least there's only one key for the car (doors, trunk, ignition and now gas cap).
2014 Chevy Caprice PPV | RetroCarGuy530 YouTube Channel
Update Calibration Files - BCM - 2014 Chevy Caprice PPV
I demonstrate the steps to use the ACDelco TDS website and then use the Service Programming System (SPS) to update the Body Control Module (BCM) calibration files to enable two features in a BCM and I finish up showing how to invoke a BCM special function to relearn some data after the BCM is updated.
https://www.youtube.com/watch?v=1AB_Hu9wT38
https://www.youtube.com/watch?v=1AB_Hu9wT38
2014 Chevy Caprice PPV | RetroCarGuy530 YouTube Channel