Re: Parting out 2013 PPV 9C1
Posted: Tue Jul 06, 2021 12:52 pm
I need a hood!
New Caprice - Discussion forums
The worldwide owner-to-owner online support system for the Chevrolet Caprice PPV
https://newcaprice.com/forum/
Parting out 2013 PPV 9C1
Page 4 of 4
Re: Parting out 2013 PPV 9C1
Posted: Thu Jul 08, 2021 1:22 pm
Looking for fenders, fender liner, hood. Possibly interested in the roller. Please text me if still available. 317-771-7802
Re: Parting out 2013 PPV 9C1
Posted: Thu Jul 08, 2021 11:23 pm
Where are you located camrat68? I have a few good rubber floors
Re: Parting out 2013 PPV 9C1
Posted: Mon Jul 12, 2021 10:15 am
I am looking for good hood hinges and a good hood latch
have good hood shocks and a new to me damaged hood already (the original hood was worse)
problem is hinges and what's below it got bent in the accidents
the hinges themselves as well as the "new" damaged hood I just got from a junkyard sit 2-3 inches too high in the back and the entire thing looks like a 3-year-old installed the hood with a hammer
have good hood shocks and a new to me damaged hood already (the original hood was worse)
problem is hinges and what's below it got bent in the accidents
the hinges themselves as well as the "new" damaged hood I just got from a junkyard sit 2-3 inches too high in the back and the entire thing looks like a 3-year-old installed the hood with a hammer
- 214590439_1328731464209257_3979190831807468967_n.jpg (193.72 KiB) Viewed 6420 times
Re: Parting out 2013 PPV 9C1
Posted: Mon Jul 12, 2021 11:59 pm
I have hood hinges
Shoot me a text 559-696-9994
Shoot me a text 559-696-9994
Re: Parting out 2013 PPV 9C1
Posted: Mon Jul 19, 2021 10:45 pm
shawnjon82-Sorry, I just saw your reply. I'm located in Central WI.
Re: Parting out 2013 PPV 9C1
Posted: Fri Jul 30, 2021 1:02 pm
ABS module?
Re: Parting out 2013 PPV 9C1
Posted: Sat Jul 31, 2021 6:45 pm
If this is what you need yes I have one
Re: Parting out 2013 PPV 9C1
Posted: Wed Aug 18, 2021 12:43 pm
Need a factory antenna (not the base) and a lower rear door scuff plate that is stuck on the sill trim. Victim is a '13 PPV. Antenna is particular to the 13, 14 up wont work. THX let me know.
Re: Parting out 2013 PPV 9C1
Posted: Sat Dec 11, 2021 10:05 pm
Do you possibly (or anyone) have the HVAC control panel (for a 2011-2013)? Mine is working OK, but the lights where it says "Zone" and "Auto" flicker from time to time, so I think it's trying to tell me something... how much for shipping to 10605 (White Plains, NY) - Thanks!