delted

Drivetrain discussion including Transmission, Differential, Driveshaft, and related items.
CrashTestDummy
Posts: 1719
Joined: Sat Feb 07, 2015 8:31 pm
Location: Pearland, Texas

Re: Trans cooling lines at trans leaking, o-ring? like the o

Post by CrashTestDummy » Thu Jun 29, 2017 6:10 pm

I'm familiar with that Ford plug. When I was in college, I worked in a parts house, and we'd always have customers come in with that piece while they were in the middle of their trans filter change wanting to know where that part went. =8-0

So, if the line set is one piece, and the seal is down in the transmission, I'm wondering if the gasket you have is the 'service part'? Or is there no way in hell that gasket is going on the car? I'm just wondering, as I've never been that deep into the transmission...... yet. ;)
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2010 Tahoe PPV (her car)
1995 DGGM Impala SS
1996 BBB Impala SS (11-second DD)
1985 Firebird - 310 LS1 C Prepared autocross car.
And some others
Do YOU have my SPID?

CHEVEN
Posts: 92
Joined: Tue Jan 17, 2017 3:38 am

Re: Trans cooling lines at trans leaking, o-ring? like the o

Post by CHEVEN » Thu Jun 29, 2017 6:36 pm

there's one on the case to the line set block (the one shown) all kinds of seals and gaskets and yet ...drip drip drip ....and now after my "I got this" fix its now DRIIIPPP DRRIIPPP DRIIIIIP .....trail.

CHEVEN
Posts: 92
Joined: Tue Jan 17, 2017 3:38 am

Re: Trans cooling lines at trans leaking, o-ring? like the o

Post by CHEVEN » Mon Jul 03, 2017 4:09 am

Wrapped up the line replacement ...had to wait for rain to stop since the car in my garage was in a terrible fight with an angry mob and missing most of its glass now ...anyway the line are easy !! Like to mention that they do NOT used the fuel line style retention method its more like a E-clip or even closer to a GM window crank clip. The easiest way was use a pick tool to un-click and it falls off ....DON'T loose it !! The lines slip right off, have that catch pan close there is a little fluid hangin out . A 13mm nut holds the only clip on the lines and a 3/8 6 pt will get the block off the trans. Good news the lines DO include the gasket. lines slide out with ZERO wrestling or cursing.
Attachments
IMG_20170701_160022331_BURST000_COVER_TOP.jpg
IMG_20170701_160022331_BURST000_COVER_TOP.jpg (503.13 KiB) Viewed 3945 times
IMG_20170701_140731567.jpg
IMG_20170701_140731567.jpg (102.23 KiB) Viewed 3945 times
IMG_20170701_140725715 (1).jpg
IMG_20170701_140725715 (1).jpg (112.06 KiB) Viewed 3945 times
IMG_20170701_140144572.jpg
IMG_20170701_140144572.jpg (80.97 KiB) Viewed 3945 times

s/c'd cav
Posts: 499
Joined: Mon May 30, 2016 8:12 am
Location: phx az

Re: Trans cooling lines at trans leaking, o-ring? like the o

Post by s/c'd cav » Mon Jul 03, 2017 4:32 am

so this mean your leak is fixed now ?

CHEVEN
Posts: 92
Joined: Tue Jan 17, 2017 3:38 am

.

Post by CHEVEN » Mon Jul 03, 2017 5:17 am

.











.
Attachments
IMG_20170701_135124636.jpg
IMG_20170701_135124636.jpg (156.89 KiB) Viewed 3944 times
IMG_20170701_134615680.jpg
IMG_20170701_134615680.jpg (21.51 KiB) Viewed 3944 times
Last edited by CHEVEN on Sun Jul 09, 2017 5:56 pm, edited 2 times in total.

s/c'd cav
Posts: 499
Joined: Mon May 30, 2016 8:12 am
Location: phx az

Re: Trans cooling lines at trans leaking, o-ring? like the o

Post by s/c'd cav » Mon Jul 03, 2017 6:31 am

that is good !!

Post Reply