Missing overhead console hardware

Discussion on body issues/mods, appearance, interior/trim, and detailing (i.e. how to keep your car looking showroom new, or a reasonable facsimile thereof...).
Post Reply
philofab
Posts: 47
Joined: Thu Jul 27, 2017 11:10 am

Missing overhead console hardware

Post by philofab »

What's missing here? There is a spot for 4 screws but only one does anything. The other three apear to be missing clips or bushings:
Last edited by philofab on Mon Aug 14, 2017 2:30 pm, edited 1 time in total.
philofab
Posts: 47
Joined: Thu Jul 27, 2017 11:10 am

Re: Missing overhead console hardware

Post by philofab »

Oops. My phone uploaded in a high res... I will try to edit it.
philofab
Posts: 47
Joined: Thu Jul 27, 2017 11:10 am

Re: Missing overhead console hardware

Post by philofab »

Lower res photo
Attachments
IMG_7036.JPG
IMG_7036.JPG (26.48 KiB) Viewed 13151 times
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: Missing overhead console hardware

Post by smwalker »

Missing the dome light assembly and sunglass holder. I upgraded mine to a black one with map lights but you can get a tan one with map lights as well from AU or maybe the SS

Image

Some extra wiring needed for the map lights to work:

WM Statesman Map Light Wiring

Tan one:
Image
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
philofab
Posts: 47
Joined: Thu Jul 27, 2017 11:10 am

Re: Missing overhead console hardware

Post by philofab »

I have it. I took it off because it was making a horrible rattling noise. The plastic bracket pictured was missing 4 screws and 3 of some sort of square plastic washer.

I ended up using 4 new screws and 3 small fender washers to attach it and eliminate the noise.
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: Missing overhead console hardware

Post by smwalker »

Oh yes I see what you mean now. Yes they are plastic square washers. DO what works.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
s/c'd cav
Posts: 1382
Joined: Mon May 30, 2016 3:12 am
Location: PHOENIX AZ

Re: Missing overhead console hardware

Post by s/c'd cav »

i need a tan one with the sunglass holder

i do have a black one with the sunglass holder , one with the sunroof dial , non-map light with sunroof dial , and 1 tan with the sunroof switches

i did put the rear SS dome with reading lights in my 14 , but the reading lights need to be wired in , also swapping the 14-17 front over head with a SS requires rewiring and a new plug , the SS uses a 6pin rectangular plug , and the ppv is a single row flat plug
Post Reply