Header Help!!
-
- Posts: 2302
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: Header Help!!
I read good things about ARH on the Tahoe/Yukon forum as well. We’re probably sticking with the OEM manifolds, but if I were going with long tubes, i’d Definitely look at ARH, or JBA, as well as Kooks.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Re: Header Help!!
ive got 2" ARH's sitting and waiting to get ceramic coated , then ill be putting them on the ppv
-
- Posts: 10
- Joined: Wed Mar 14, 2018 11:09 am
- Location: MN
Re: Header Help!!
Has anybody tried the JBA headers for a SS? There about the cheapest I've yet to find...540 for uncoated and 650 for ti ceramic
2011 9C3
2013 9C1
2013 9C1
Re: Header Help!!
there is quite a few that have used the JBA ss headersPPV_Farmer wrote:Has anybody tried the JBA headers for a SS? There about the cheapest I've yet to find...540 for uncoated and 650 for ti ceramic
-
- Posts: 10
- Joined: Wed Mar 14, 2018 11:09 am
- Location: MN
Re: Header Help!!
Any opinions on figment/quality? Sorry if it's been talked about already I'm new here and haven't dug that deep in the forum yet. Thanks
2011 9C3
2013 9C1
2013 9C1
Re: Header Help!!
they are a good part and fit with out having to delete or move the engine oil cooler
Re: Header Help!!
Where did you find those prices?
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
-
- Posts: 10
- Joined: Wed Mar 14, 2018 11:09 am
- Location: MN
Re: Header Help!!
Jbaspeedshop.com or carparts.com was about the same price on the headers and I think the mid pipe was cheaper... 250 or so I think
2011 9C3
2013 9C1
2013 9C1
-
- Posts: 165
- Joined: Tue Jan 10, 2017 12:43 pm
Re: Header Help!!
I have JBA's waiting to go on as soon as I finish up my DOD delete. I will post my experience
-
- Posts: 165
- Joined: Tue Jan 10, 2017 12:43 pm
Re: Header Help!!
JBA's are on. Perfect fit on my 2013. I was able to leave all the bubble wrap and plastic that protected them for shipment on during installation to keep them from getting scratched. Great fit with no issues!