Brand of push bar

Discussion on body issues/mods, appearance, interior/trim, and detailing (i.e. how to keep your car looking showroom new, or a reasonable facsimile thereof...).
User avatar
No Moa
Posts: 472
Joined: Tue Sep 20, 2016 9:30 pm
Location: Maine

Re: Brand of push bar

Post by No Moa »

I looked it up, it’s amazing the cost difference, EBay $533, mechanics supply $125. It’s a good looking push bar.
2014 Caprice PPV silver
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.
brewerb258
Posts: 37
Joined: Thu May 18, 2017 1:05 pm
Location: Jacksonville FL

Re: Brand of push bar

Post by brewerb258 »

You have to shop around, Amazon is where I got mine for around $130
2012 PC3 Caprice
3.6 LFX V6 w/ over 200k miles *SOLD* @250,000 Miles.

2013 9C1 Caprice
3.6 LFX V6 with 80k miles

"Dispatch, show me on a traffic stop."
"Uh you can disregard, I pulled the guy that pays my salary, got to let him go."
User avatar
No Moa
Posts: 472
Joined: Tue Sep 20, 2016 9:30 pm
Location: Maine

Re: Brand of push bar

Post by No Moa »

brewerb258 wrote:You have to shop around, Amazon is where I got mine for around $130

How would you say the quality is? Yea I would buy from amazon also.
2014 Caprice PPV silver
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.
User avatar
Fudgehog
Posts: 278
Joined: Sat Aug 19, 2017 2:08 am
Location: Wisconsin

Re: Brand of push bar

Post by Fudgehog »

Go Rhino is out of TX, I'm very happy with mine. Granted it doesn't have the welded center bar. Very very sturdy. Only modification is a slight cut to the plastic piece under the headlamp, which doesn't affect its functionality at all. Obviously can get it without the wraparound bars as well.

Holes in my bumper courtesy of WSP. They use Setina.
Attachments
InShot_20180423_181557646_1_900x920.jpg
InShot_20180423_181557646_1_900x920.jpg (698.25 KiB) Viewed 7464 times
13 Caprice 6.0L, Solo catback exhaust, 3.27 diff, VCM OTR and Volant throttle spacer, MSD coils plugs wires, transmission pan upgrade and widemouth filter. Camaro 18" rims.

Active Duty USAF
User avatar
No Moa
Posts: 472
Joined: Tue Sep 20, 2016 9:30 pm
Location: Maine

Re: Brand of push bar

Post by No Moa »

Go Rhino and Go industries are 2 different companys as far as I've seen. Ive had a go rhino on an old caprice, they are nice, pricey though,
2014 Caprice PPV silver
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.
brewerb258
Posts: 37
Joined: Thu May 18, 2017 1:05 pm
Location: Jacksonville FL

Re: Brand of push bar

Post by brewerb258 »

No Moa wrote:
brewerb258 wrote:You have to shop around, Amazon is where I got mine for around $130

How would you say the quality is? Yea I would buy from amazon also.
I would say it is the same quality as go rhino. It's solid and holds up well.



I think it looks better with wheel covers
Attachments
rsz_img_2083.jpg
rsz_img_2083.jpg (79.38 KiB) Viewed 7451 times
2012 PC3 Caprice
3.6 LFX V6 w/ over 200k miles *SOLD* @250,000 Miles.

2013 9C1 Caprice
3.6 LFX V6 with 80k miles

"Dispatch, show me on a traffic stop."
"Uh you can disregard, I pulled the guy that pays my salary, got to let him go."
User avatar
No Moa
Posts: 472
Joined: Tue Sep 20, 2016 9:30 pm
Location: Maine

Re: Brand of push bar

Post by No Moa »

I do like those wheel covers! I may do that down the road
2014 Caprice PPV silver
2017 Ram 3500
2002 CETA trans am
1996 Impala ss (soon to be t56)
1995 9c1
1977 Trans am SE 4spd.
1978 trans am 400 4 spd.
Post Reply