Hello from CT

Welcome new members, please make your first post in this section. Say hello & tell us a little bit about you and your car. We're happy to see you here!
Forum rules
Welcome new members, please make your first post in this section. Say hello & tell us a little bit about you and your car. We're happy to see you here!
User avatar
JimCT_9C1
Posts: 14
Joined: Mon Dec 17, 2018 7:55 pm

Hello from CT

Post by JimCT_9C1 »

Hello everyone - jumping in with a 2012 PPV 9C1.
Prior owner did intake and exhaust, and programmed out AFM/DOD.
In the process of sorting and planning. Thinking of gears and physical AFM delete for starters.

Still modding my 95 and 96 9C1s - Love big iron.

Jim
2012 Caprice PPV 9C1 L77
OTR Intake, JBA Exhaust - More to come ...
lastcall190
Posts: 604
Joined: Mon Sep 11, 2017 5:17 am
Location: North Jersey

Re: Hello from CT

Post by lastcall190 »

Welcome from NJ.

Post up some pics if you can.

-J
2012 Caprice
2008 CVPI

Both gone but not forgotten...
User avatar
Mooseman
Posts: 1075
Joined: Mon Jun 12, 2017 11:35 pm
Location: Ottawa, ON Canada
Contact:

Re: Hello from CT

Post by Mooseman »

Welcome!
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
User avatar
JimCT_9C1
Posts: 14
Joined: Mon Dec 17, 2018 7:55 pm

Re: Hello from CT

Post by JimCT_9C1 »

Thanks for the welcome!
I will check what I have for pics and post a couple up.

Looking forward to learning from those who have been down this road before!

Jim
2012 Caprice PPV 9C1 L77
OTR Intake, JBA Exhaust - More to come ...
User avatar
JimCT_9C1
Posts: 14
Joined: Mon Dec 17, 2018 7:55 pm

Re: Hello from CT

Post by JimCT_9C1 »

Thanks again for the welcome - here's a profile pic.
It's going to be a fun ride!

Jim

PPV-profile.gif
PPV-profile.gif (195.14 KiB) Viewed 9327 times
2012 Caprice PPV 9C1 L77
OTR Intake, JBA Exhaust - More to come ...
lastcall190
Posts: 604
Joined: Mon Sep 11, 2017 5:17 am
Location: North Jersey

Re: Hello from CT

Post by lastcall190 »

Looks good... do you know if this car came from NJ? Very similar car popped up on craigslist a little while ago, had long tubes and a few other bolt on modifications. Enjoy the modding!

-J
2012 Caprice
2008 CVPI

Both gone but not forgotten...
User avatar
JimCT_9C1
Posts: 14
Joined: Mon Dec 17, 2018 7:55 pm

Re: Hello from CT

Post by JimCT_9C1 »

Thanks - and it did come from NJ.
Still planning next steps - seeing gears in the not too distant future ...

Jim
2012 Caprice PPV 9C1 L77
OTR Intake, JBA Exhaust - More to come ...
CrashTestDummy
Posts: 2300
Joined: Sat Feb 07, 2015 2:31 pm
Location: Pearland, Texas

Re: Hello from CT

Post by CrashTestDummy »

JimCT_9C1 wrote: Fri Dec 28, 2018 3:10 pm Hello everyone - jumping in with a 2012 PPV 9C1.
Prior owner did intake and exhaust, and programmed out AFM/DOD.
In the process of sorting and planning. Thinking of gears and physical AFM delete for starters.

Still modding my 95 and 96 9C1s - Love big iron.

Jim
Welcome! Yeah, there are several on this forum who own/owned earlier B-body GMs.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
User avatar
JimCT_9C1
Posts: 14
Joined: Mon Dec 17, 2018 7:55 pm

Re: Hello from CT

Post by JimCT_9C1 »

Thanks for the welcome, Gene -
I noticed a couple of familiar screen names from ISSF, and some B-bodies in signatures.
The small world of big iron!

Jim
2012 Caprice PPV 9C1 L77
OTR Intake, JBA Exhaust - More to come ...
lastcall190
Posts: 604
Joined: Mon Sep 11, 2017 5:17 am
Location: North Jersey

Re: Hello from CT

Post by lastcall190 »

Nice, from what I recall, seemed like a nice platform to start a nice build with if that's your cup of tea. Enjoy!

-J
2012 Caprice
2008 CVPI

Both gone but not forgotten...
Post Reply