JBA Headers

Discussion on fuel delivery & intake/exhaust tech & mods.
Groundczero
Posts: 93
Joined: Thu Sep 20, 2018 7:52 am

Re: JBA Headers

Post by Groundczero »

OK looking to do this the coming week.

Have a question, I got HP tuner and in older LS stuff I did I just edited out the back O2 sensors.

Is that still something I can do on this car looking to go LSA in the future.

I am not gonna run any cats.
Groundczero
Posts: 93
Joined: Thu Sep 20, 2018 7:52 am

Re: JBA Headers

Post by Groundczero »

sorry not good at doing build pics. Headers fit with out issues.
imagejpeg_0(2).jpg
imagejpeg_0(2).jpg (213.66 KiB) Viewed 19943 times
lastcall190
Posts: 604
Joined: Mon Sep 11, 2017 5:17 am
Location: North Jersey

Re: JBA Headers

Post by lastcall190 »

Nice! Is that the extension piece coming off the headers that is included? How much pipe would you say is there, about 6"?

-J
2012 Caprice
2008 CVPI

Both gone but not forgotten...
Groundczero
Posts: 93
Joined: Thu Sep 20, 2018 7:52 am

Re: JBA Headers

Post by Groundczero »

lastcall190 wrote: Tue Aug 06, 2019 7:23 am Nice! Is that the extension piece coming off the headers that is included? How much pipe would you say is there, about 6"?

-J
It is a 3" to 2.5" reducer

https://www.amazon.com/gp/product/B07GD ... UTF8&psc=1

This was a pic during mock I used some resonators before the x-pipe
https://www.amazon.com/gp/product/B07BH ... UTF8&psc=1

and Magna flows out back
https://www.amazon.com/gp/product/B000C ... UTF8&psc=1
lastcall190
Posts: 604
Joined: Mon Sep 11, 2017 5:17 am
Location: North Jersey

Re: JBA Headers

Post by lastcall190 »

Got it! Thanks.

-J
2012 Caprice
2008 CVPI

Both gone but not forgotten...
Groundczero
Posts: 93
Joined: Thu Sep 20, 2018 7:52 am

Re: JBA Headers

Post by Groundczero »

Ok so have been running around with this setup for a little over a week.

I was looking to keep the car quiet since this is the new daily that can have a baby in the back.

The car has a little more noise than stock but it is a nice deep rumble. In addition there is only a minor difference in sound between 4 and 8 cylinder mode so far I am really liking it.
SmittySS
Posts: 17
Joined: Tue Jul 09, 2019 10:22 am

Re: JBA Headers

Post by SmittySS »

So when you say the headers went on with now issues... you mean you had to make zero modification to them and zero "messaging" to the tubes to clear things?
I'm very interested in putting a set of these on my car.
Not always an easy sell to the wife when there isn't currently anything wrong with the exhaust that is on the car... but I know it "needs" long tubes.

Thanks for the post. Share some more pics, and a video so we can hear it!
Smitty
s/c'd cav
Posts: 1382
Joined: Mon May 30, 2016 3:12 am
Location: PHOENIX AZ

Re: JBA Headers

Post by s/c'd cav »

SmittySS wrote: Thu Aug 29, 2019 11:43 am So when you say the headers went on with now issues... you mean you had to make zero modification to them and zero "messaging" to the tubes to clear things?
I'm very interested in putting a set of these on my car.
Not always an easy sell to the wife when there isn't currently anything wrong with the exhaust that is on the car... but I know it "needs" long tubes.

Thanks for the post. Share some more pics, and a video so we can hear it!
Smitty
they are a PROPER fit for our cars , only modification is connecting them up to the rest of the exhaust
SmittySS
Posts: 17
Joined: Tue Jul 09, 2019 10:22 am

Re: JBA Headers

Post by SmittySS »

Thanks!
The price on the JBA seems reasonable when compared to the Kooks...
Thanks again for the info.
Smitty
lastcall190
Posts: 604
Joined: Mon Sep 11, 2017 5:17 am
Location: North Jersey

Re: JBA Headers

Post by lastcall190 »

Very reasonable. I think in the past (not sure about now), it was finding a place that ACTUALLY had them in stock, which was the issue.

-J
2012 Caprice
2008 CVPI

Both gone but not forgotten...
Post Reply