Pulley replacement
Pulley replacement
Hey, so I'm new to the forum and just as new to chevy products. I've been searching older posts but haven't found a clear answer.
My crankshaft pulley (harmonic balancer i guess...) has a pretty good wobble, so it needs replacing. And if it needs replacing it needs upgrading. I found a few on summit but not sure on quality. Anyone have links to a better pulley? L8ghter would be great. Possibly underdrive.
My crankshaft pulley (harmonic balancer i guess...) has a pretty good wobble, so it needs replacing. And if it needs replacing it needs upgrading. I found a few on summit but not sure on quality. Anyone have links to a better pulley? L8ghter would be great. Possibly underdrive.
Re: Pulley replacement
There is a TSB on those depending on the year, obviously a bad GM part I had mine done 10K miles ago no wobble still...
Re: Pulley replacement
Powerbond's 25% underdrive balancer works great on my car. I have no charging issues, but my idle is pretty high at 800-900 RPM. Part# PBU1117-SS25.
2011 9C3: 11.48 @118.
Re: Pulley replacement
TSB? I'm not familiar with the term.
I saw the powerbond at summit. I may go with their own then, since it's about 1/3 the cost. Has the underdrive made enough of a gain to justify the money?
I saw the powerbond at summit. I may go with their own then, since it's about 1/3 the cost. Has the underdrive made enough of a gain to justify the money?
Re: Pulley replacement
I have no idea on power gains since I changed a lot of parts at once, but if it's a 5-10 HP gain as some say, it's a good value in terms of dollars per HP. If you can find a used one, it's an even better deal. I think I paid just over $100 for mine.white12 wrote:TSB? I'm not familiar with the term.
I saw the powerbond at summit. I may go with their own then, since it's about 1/3 the cost. Has the underdrive made enough of a gain to justify the money?
2011 9C3: 11.48 @118.
-
- Posts: 2301
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: Pulley replacement
$10 per HP is the going rate for aftermarket replacement parts updates. So if they claim 10 HP, and charge about $100, then you are on par. Try to find reviews where others have at least tried dyno tests, though, just to be sure.
I have an underdrive crank pulley on our 96 SS though, and can attest it helps. I’d do the same if we needed a replacement on the 9C1.
I have an underdrive crank pulley on our 96 SS though, and can attest it helps. I’d do the same if we needed a replacement on the 9C1.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Re: Pulley replacement
If its only 100 then it's definitely worth it. Summit was charging 230. I'll see if I can find it elsewhere.
Re: Pulley replacement
TSB stands for Technical Service Bulletin. All of the manufacturers will release these as a "description/fix" of an acknowledged problem. There are searchable sites for TSB's. I apologize for not having that available..white12 wrote:TSB? I'm not familiar with the term.
I saw the powerbond at summit. I may go with their own then, since it's about 1/3 the cost. Has the underdrive made enough of a gain to justify the money?
Regards,
Maurice
Maurice Sheil
mhsheil@gmail.com
2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
mhsheil@gmail.com
2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
Re: Pulley replacement
If your car qualifies for the TSB then any GM dealer does the replacement for free.
On the under drive pulley scene how would installation work with the factory belt? and I don't understand why it would effect idle since that's a PCM function. I've always heard that the prob with them is unsteady IDLE volts from the alternator since the idle is the same but the RPM of the belt is actually slower meaning it turns the alternator pulley slower?
On the under drive pulley scene how would installation work with the factory belt? and I don't understand why it would effect idle since that's a PCM function. I've always heard that the prob with them is unsteady IDLE volts from the alternator since the idle is the same but the RPM of the belt is actually slower meaning it turns the alternator pulley slower?
Re: Pulley replacement
That's right, they turn the alternator slower, but since my idle is set higher than stock, my alternator speed should be back at stock speed at least. With the Powerbond pulley, you need to use shorter belts. I have the numbers somewhere if anyone needs them.
Last edited by kevink on Tue May 01, 2018 11:34 am, edited 2 times in total.
2011 9C3: 11.48 @118.