Camaro console finished….kinda

Discussion on body issues/mods, appearance, interior/trim, and detailing (i.e. how to keep your car looking showroom new, or a reasonable facsimile thereof...).
Post Reply
Bill.kurman
Posts: 65
Joined: Tue Oct 19, 2021 5:54 pm

Camaro console finished….kinda

Post by Bill.kurman »

Just got the shifter cubby form ipf racing installed it finishes it off good still on the fence with the silver bezel might paint it textured black
Attachments
DC14A1E9-8069-424A-A099-69B8FDD68F4D.jpeg
DC14A1E9-8069-424A-A099-69B8FDD68F4D.jpeg (3.01 MiB) Viewed 1724 times
F76A1504-1674-4D3E-934B-34B41765CB53.jpeg
F76A1504-1674-4D3E-934B-34B41765CB53.jpeg (3.33 MiB) Viewed 1724 times
D0DF6C46-CD8B-4B44-BD98-61D8BFEDB64A.jpeg
D0DF6C46-CD8B-4B44-BD98-61D8BFEDB64A.jpeg (3.63 MiB) Viewed 1724 times
F828E341-F568-4C2B-9F04-D38E62868BE9.jpeg
F828E341-F568-4C2B-9F04-D38E62868BE9.jpeg (2.7 MiB) Viewed 1724 times
User avatar
Mooseman
Posts: 1075
Joined: Mon Jun 12, 2017 11:35 pm
Location: Ottawa, ON Canada
Contact:

Re: Camaro console finished….kinda

Post by Mooseman »

That looks PDG (Pretty Damned Good).
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
User avatar
elc32955
System Manager
Posts: 2718
Joined: Thu Nov 29, 2012 10:32 am
Location: East Central Florida
Contact:

Re: Camaro console finished….kinda

Post by elc32955 »

Not bad at all. Only difference between mine and yours is that I set my console back slightly from the police dash cap, I did that to provide for a space for cords to hide into since a lot of times electronics has longer power cords that tend to go everywhere with the slack.

Looks nice!

Thanks
Eric
System Manager and your tour guide for the day. 2015 Caprice w/LFX, former NC DPS staff car. Partial hybrid G8/SS/Camaro SS interior mods, SS MyLink radio upgrade, 2016 Camaro V6 rims, GMPP Malibu chrome exhaust tips, otherwise bone stock for now.
bstoner
Posts: 233
Joined: Wed May 05, 2021 2:12 pm

Re: Camaro console finished….kinda

Post by bstoner »

I presume you guys are using a 5th gen console? Any issues with the install? Does it bolt in? Thanks.
2014 Caprice PPV, 6.0L, BTR Stage 2 Cam, 3.45, 3" exhaust, Rotofab intake, Chris Henry tuned, future LSA....
Bill.kurman
Posts: 65
Joined: Tue Oct 19, 2021 5:54 pm

Re: Camaro console finished….kinda

Post by Bill.kurman »

There’s definitely cutting and drilling involved but it’s really not that difficult to make work It literally took me 30 minutes to get it ruffed in
JUNKYARD_JACK
Posts: 134
Joined: Mon May 17, 2021 10:13 am

Re: Camaro console finished….kinda

Post by JUNKYARD_JACK »

I'm curious about how you mounted it, looks a lot taller than mine but I took out the parking brake. I love the shifter cubby, I'll have to send IPF a message on Instagram about getting one of those.
JUNKYARD_JACK
Posts: 134
Joined: Mon May 17, 2021 10:13 am

Re: Camaro console finished….kinda

Post by JUNKYARD_JACK »

https://ipfracing.com/products/camaro-console-swap

Good looking kit, seems to have everything needed to install one of these consoles if anyone is looking to do this
Post Reply