Interior pillar covers

Discussion on body issues/mods, appearance, interior/trim, and detailing (i.e. how to keep your car looking showroom new, or a reasonable facsimile thereof...).
Post Reply
nosubs22
Posts: 4
Joined: Mon Dec 26, 2022 10:00 pm

Interior pillar covers

Post by nosubs22 »

Newb just purchased a 2014 and missing interior panel pieces. Are all the a,b, and c interior pillar panels the same from 2011 thru 2017? May be a stupid question to ask, but I see people marketing and selling for the two different series years.

Thanks.
Bill.kurman
Posts: 65
Joined: Tue Oct 19, 2021 5:54 pm

Re: Interior pillar covers

Post by Bill.kurman »

I have 14 and I’m currently using 13 and down Holden spec b pillars I had to cut off a alignment pin but other then that they fit
nosubs22
Posts: 4
Joined: Mon Dec 26, 2022 10:00 pm

Re: Interior pillar covers

Post by nosubs22 »

Thanks for the input. Guess just really need to know about the c pillars now.
smwalker
Administration Staff
Posts: 2203
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: Interior pillar covers

Post by smwalker »

A's are different 11-13 and 14+ - 14+ have the tweeter in them
B's should swap OK
C's Should swap OK

SS A's Will fit a PPV
SS B's Will Fit a PPV
SS C's Will not fit.

No A's , B's or C's from Australlia fit the PPV well because our headliners have extra padding and airbags the Aussies do not have.

EDIT: Note below the AUSSIE B's do fit but they are an adjustable belt anchor so you have to modify the cover to fit our stationary anchors.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
nosubs22
Posts: 4
Joined: Mon Dec 26, 2022 10:00 pm

Re: Interior pillar covers

Post by nosubs22 »

Thank you, much appreciated.
Bill.kurman
Posts: 65
Joined: Tue Oct 19, 2021 5:54 pm

Re: Interior pillar covers

Post by Bill.kurman »

Off the boat from Australia 13 and down fit great here on my 14
Attachments
A25E08AA-43A9-4214-913C-F362C21BDE8F.jpeg
A25E08AA-43A9-4214-913C-F362C21BDE8F.jpeg (2.62 MiB) Viewed 722 times
smwalker
Administration Staff
Posts: 2203
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: Interior pillar covers

Post by smwalker »

But you do not a have the adjustable belt under it yes? I guess I should have been more specific that is the part that does not work with out cars. Did not know you could use it seperately.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Bill.kurman
Posts: 65
Joined: Tue Oct 19, 2021 5:54 pm

Re: Interior pillar covers

Post by Bill.kurman »

I just glued the adjustment slider in place problem solved these look much better than what I had who cares if I have a fake adjustment
smwalker
Administration Staff
Posts: 2203
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: Interior pillar covers

Post by smwalker »

Here is what the C's from Australia end up looking like:
306316467_137934742290108_8225553981239205124_n.jpg
306316467_137934742290108_8225553981239205124_n.jpg (268.37 KiB) Viewed 677 times
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Post Reply