11-13 Cluster Unlcoking

Electronic systems, stereo and Holden iQ, wiring, it all goes here....
Post Reply
ColoCapriceGuy
Posts: 53
Joined: Sun May 23, 2021 9:13 pm

11-13 Cluster Unlcoking

Post by ColoCapriceGuy »

Good Afternoon,

I am offering the ability to unlock clusters to add the following (you can pick and choose):

-Gear Display like 9c3 (for console swapped cars, shift boxes, and steering wheel paddles)
-Hourmeter on 11's (starts at 0)
-Navigation display (requires Silverbox IQ with Nav)
-TPMS Switch (turn on and off TPMS system (requires language to be changed to UK so the tire will read Tyre and Customization will read Customisation)
-Change Boot from Certified Speedometer to Welcome like standard Holdens


$80 is all-inclusive, which will get you programming and return shipping.

I can also program miles from scratch if you are buying another cluster to replace yours, and program to fit. I am US-based.

I am stepping in for MNP; if he decides to return and start programming again, I will not offer this service.

I believe the only other person who offers this is OBDSync, which cannot do all I can. It is $300+ to get a fraction of these features.
redsled579
Posts: 46
Joined: Fri Feb 19, 2021 1:21 pm

Re: 11-13 Cluster Unlcoking

Post by redsled579 »

Thats a great price for all the available changes. Out of curiosity can you, or is it available to be able to be done, program a gxp overlay with the 7k rpm tach and 180mph speedometer?
2012 9C3 Phantom Black ex K9 unit. - "McGruff"
ColoCapriceGuy
Posts: 53
Joined: Sun May 23, 2021 9:13 pm

Re: 11-13 Cluster Unlcoking

Post by ColoCapriceGuy »

Yes, I just did one this week for a member. The overlay costs about $30 for a new old stock one and lays right onto our clusters. Then, it's all programming from there.

The only "odd" part is it does say GXP on the bottom, and the traction off light is a skip shift light, so it will light that up when you turn traction off.
redsled579
Posts: 46
Joined: Fri Feb 19, 2021 1:21 pm

Re: 11-13 Cluster Unlcoking

Post by redsled579 »

ColoCapriceGuy wrote: Wed Jul 31, 2024 8:07 pm Yes, I just did one this week for a member. The overlay costs about $30 for a new old stock one and lays right onto our clusters. Then, it's all programming from there.

The only "odd" part is it does say GXP on the bottom, and the traction off light is a skip shift light, so it will light that up when you turn traction off.
Awesome. I bought one a while back because they were dirt cheap and I fugured that someone would be able to do it eventually. I have a friend that has parted a lot of these things out so ill try to grab an extra cluster and swap the overlay before i send it your way. Attached a pic of the one i got should be correct
Attachments
IMG_20240731_212810533.jpg
IMG_20240731_212810533.jpg (3.25 MiB) Viewed 2488 times
2012 9C3 Phantom Black ex K9 unit. - "McGruff"
ColoCapriceGuy
Posts: 53
Joined: Sun May 23, 2021 9:13 pm

Re: 11-13 Cluster Unlcoking

Post by ColoCapriceGuy »

Yep that is it and a spare cluster works great. Message me when you’re ready to go
redsled579
Posts: 46
Joined: Fri Feb 19, 2021 1:21 pm

Post by redsled579 »

Great ill PM you when I'm ready
2012 9C3 Phantom Black ex K9 unit. - "McGruff"
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest