2013 PPV Weekend Warrior/Mad Max Build

Tell us about your new PPV, show us some pictures, let us know how you did what you did!
Forum rules
One thread per car per member in this section. No thread hijacking in this section please, if it's strictly a tech discussion please move it to the appropriate sub-forum - moderators can assist if needed or requested.
Posts: 2202
Joined: Sat Feb 07, 2015 8:31 pm
Location: Pearland, Texas

Re: 2013 PPV Weekend Warrior/Mad Max Build

Post by CrashTestDummy » Sat Oct 09, 2021 8:36 pm

Mooseman wrote:
Fri Oct 08, 2021 2:58 pm
It came with the lights and all? Man, that would be illegal here, especially after what happened here in Nova Scotia https://en.wikipedia.org/wiki/2020_Nova_Scotia_attacks. In fact, the RCMP has stopped selling their old PCs to the public even if they are stripped.
<sarcasm> It's nice the government didn't over react. </sarcasm>
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2010 Tahoe PPV (her car)
1995 DGGM Impala SS
1996 BBB Impala SS (11-second DD)
1985 Firebird - 310 LS1 C Prepared autocross car.
And some others
Do YOU have my SPID?

Posts: 35
Joined: Sun Jul 05, 2020 5:29 am

Re: 2013 PPV Weekend Warrior/Mad Max Build

Post by BarryM » Sat Nov 13, 2021 2:00 pm

V6 (silver one) is now daily driver for my son.
It really runs well, the V6 is no slouch at 300 hp. Rides like a Caddy :D
Had mine to the track - went 11.77, but differential axle seal let go only letting me make one pass.
(LOTS of smoke - rear end grease directly on hot exhaust)
13 and 14.jpg
13 and 14.jpg (578.89 KiB) Viewed 489 times

User avatar
HoldOn SV
Posts: 124
Joined: Thu Nov 21, 2019 3:34 am

Re: 2013 PPV Weekend Warrior/Mad Max Build

Post by HoldOn SV » Sat Nov 13, 2021 6:10 pm

Noice! 1👊 A video from the track would be cool too! Here's an easy way to share it here, if you have a Google account (Gmail, YouTube, etc). https://support.google.com/drive/answer ... %3DDesktop
🦘 2013 L77 9C1 🚘

Posts: 14
Joined: Wed Aug 12, 2020 10:16 pm

Re: 2013 PPV Weekend Warrior/Mad Max Build

Post by 73TA » Sat Jan 08, 2022 6:05 am

Hey Barry, what was the width on the rims you widened? I acquired a set of 20X11 with 315/35/20's for the rear and 20X9 275/40/20's for the front from a Zl-1 track racer. Was planning on using on a different project and they are just to big. I ran the tire calculator for yours and mine and came up with this:

315/35/20 28.7" H, 12.4" W
325/45/20 29.5 H, 12.8" W

You stated that your tires are 30.2"

I assume that my wheels and tires will fit if the offset is correct?

What do you think?


Post Reply