Big Single TURBO build ...LOADING

Tell us about your new PPV, show us some pictures, let us know how you did what you did!
Forum rules
One thread per car per member in this section. No thread hijacking in this section please, if it's strictly a tech discussion please move it to the appropriate sub-forum - moderators can assist if needed or requested.
Tansman
Posts: 95
Joined: Tue Dec 20, 2016 6:34 pm

Re: Big Single TURBO build ...LOADING

Post by Tansman »

CrashTestDummy wrote: Mon May 13, 2019 12:08 pm I'm surprised the rear tires don't light up every time you open the trunk with all those stickers! :lol:
So am I!

I had to pull it out of the garage so I figured I'd get a picture. Seats are out to run the meth injection wires. If you're on the Facebook page I posted an idle video!
Attachments
20190514_201300.jpg
20190514_201300.jpg (5.42 MiB) Viewed 17869 times
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)
sar94
Posts: 8
Joined: Thu Jan 03, 2019 8:29 pm

Re: Big Single TURBO build ...LOADING

Post by sar94 »

Sounded great on facebook..keep at it you are almost there.
Tansman
Posts: 95
Joined: Tue Dec 20, 2016 6:34 pm

Re: Big Single TURBO build ...LOADING

Post by Tansman »

Finally got the meth line ran to the front, mounted the pump in the spare tire well.
Attachments
20190518_124319.jpg
20190518_124319.jpg (3.96 MiB) Viewed 17805 times
20190518_124313.jpg
20190518_124313.jpg (4.29 MiB) Viewed 17805 times
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)
Tansman
Posts: 95
Joined: Tue Dec 20, 2016 6:34 pm

Re: Big Single TURBO build ...LOADING

Post by Tansman »

Trunk looks clean again!
Attachments
20190518_130233.jpg
20190518_130233.jpg (3.75 MiB) Viewed 17804 times
20190518_130226.jpg
20190518_130226.jpg (3.44 MiB) Viewed 17804 times
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)
Tansman
Posts: 95
Joined: Tue Dec 20, 2016 6:34 pm

Re: Big Single TURBO build ...LOADING

Post by Tansman »

I had the down pipe off to weld my o2 on, so I painted it gloss black with some hightemp paint. It looks a little more stealth now .

I plan to wrap this too up to right before it comes out of the fender.
Attachments
20190521_204759.jpg
20190521_204759.jpg (4.92 MiB) Viewed 17776 times
20190521_204719.jpg
20190521_204719.jpg (3.81 MiB) Viewed 17776 times
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)
Tansman
Posts: 95
Joined: Tue Dec 20, 2016 6:34 pm

Re: Big Single TURBO build ...LOADING

Post by Tansman »

I put the meth nozzle in the silicone 90 before the throttle body. I used this piece from Amazon and flap disked it down until it was as thin as I could get it so the nozzle would be exposed and hopefully be able to have a good straight spray into the TB.
Attachments
received_337101223644639.jpeg
received_337101223644639.jpeg (227.05 KiB) Viewed 17676 times
received_605873926577510.jpeg
received_605873926577510.jpeg (304.55 KiB) Viewed 17676 times
Screenshot_20190528-070939_Amazon Shopping.jpg
Screenshot_20190528-070939_Amazon Shopping.jpg (524.44 KiB) Viewed 17676 times
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)
Tansman
Posts: 95
Joined: Tue Dec 20, 2016 6:34 pm

Re: Big Single TURBO build ...LOADING

Post by Tansman »

Blow off valve flange is welded onto the 4in spectre pipe. I put it about 6in or so before the maf. I read that's about the best placement for it.
Attachments
received_423634728416791.jpeg
received_423634728416791.jpeg (289.21 KiB) Viewed 17676 times
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)
Tansman
Posts: 95
Joined: Tue Dec 20, 2016 6:34 pm

Re: Big Single TURBO build ...LOADING

Post by Tansman »

The turbo outlet has a leg coming off it now, this was the last piece I needed to fully connect the coldside!
Attachments
received_323395958327785.jpeg
received_323395958327785.jpeg (293.13 KiB) Viewed 17676 times
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)
Tansman
Posts: 95
Joined: Tue Dec 20, 2016 6:34 pm

Re: Big Single TURBO build ...LOADING

Post by Tansman »

I'm doing an IAT breakout so the IAT will be after the methanol nozzle. Its going into the short tube right in front of the TB. I wanted it in the intake but I don't know where people usually put these. So this should work!
Attachments
received_343707449670248.jpeg
received_343707449670248.jpeg (185.71 KiB) Viewed 17676 times
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)
CrashTestDummy
Posts: 2300
Joined: Sat Feb 07, 2015 2:31 pm
Location: Pearland, Texas

Re: Big Single TURBO build ...LOADING

Post by CrashTestDummy »

Nice work. I have GOT to learn how to TIG!
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Post Reply