I'm putting a pontiac g8 center console in, but somehow I'm missing the bracket where the ball of the ebrake cable hooks into it and bolts to the handbrake lever. Somehow when I pulled it from the G8 in the parts yard, it wound up missing. Can't find a picture of it on the internet to properly describe this. Any help would be appreciated.
If not, then I guess I'll have to put the old 9c1 console back in (ugh)
Handbrake Parts Wanted
Forum rules
Acceptable items for posting include OEM new/used replacement parts, aftermarket parts, salvage yard parts, maintenance/repair tools & tooling, service publications, programming equipment, and misc. items for Caprice PPV cars. This forum is moderated, posts from members with less than 5 forum posts may be removed. Any questions please contact a moderator. SPECIAL NOTE - We have no role or liability in any transactions other then to provide a venue to advertise the items. Disputes must be resolved independently between the parties involved in any transaction.
Acceptable items for posting include OEM new/used replacement parts, aftermarket parts, salvage yard parts, maintenance/repair tools & tooling, service publications, programming equipment, and misc. items for Caprice PPV cars. This forum is moderated, posts from members with less than 5 forum posts may be removed. Any questions please contact a moderator. SPECIAL NOTE - We have no role or liability in any transactions other then to provide a venue to advertise the items. Disputes must be resolved independently between the parties involved in any transaction.
Re: Handbrake Parts Wanted
If you're talking about the small adjuster bracket that's at the ball end of the cable, I just cut a slit in it to get it off the G8 cable and put it on the 9C1 cable however you don't even have that. You might have to buy a 9C3 cable.
I actually have one that I never used if you can't get it from GM. Shipping will be a bitch from here though.
I actually have one that I never used if you can't get it from GM. Shipping will be a bitch from here though.
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Re: Handbrake Parts Wanted
Can you take a picture of your cable? I'm gonna call GM sometime to see if there's a specific part number for it.
Re: Handbrake Parts Wanted
Sorry mate if I got your hopes up. I just can't find it in my garage's pile of poop.
This post shows the bracket:
viewtopic.php?f=20&t=1065&start=10#p9601
He welded it. I didn't.
The cable with the bracket/adjuster block is Part #92191009. I show it as NLA. GMPartsdirect shows a price so may still be available.
This post shows the bracket:
viewtopic.php?f=20&t=1065&start=10#p9601
He welded it. I didn't.
The cable with the bracket/adjuster block is Part #92191009. I show it as NLA. GMPartsdirect shows a price so may still be available.
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Re: Handbrake Parts Wanted
I see it online anywhere from what you said to $132. It's probably worth the price here in the US. I will order it soon. I'm glad the block is there. I can work with that.
Re: Handbrake Parts Wanted
There is a guy an FB that is machining them with a slot so you can slip it on the old cable. Will try to post his info.
-
- Posts: 6
- Joined: Thu Dec 16, 2021 2:17 pm
Re: Handbrake Parts Wanted
As Steve mentioned, I am the guy who sells these blocks! You can shoot me a message on Facebook Msg or you can email me below:
semihguneysu1234@gmail.com
semihguneysu1234@gmail.com
Re: Handbrake Parts Wanted
Sent you an email. Lemme know if you got it