Enabling Performance Pages on 14-17 Clusters

Electronic systems, stereo and Holden iQ, wiring, it all goes here....
LTZ2014
Posts: 3
Joined: Mon Aug 01, 2022 7:59 am

Re: Enabling Performance Pages on 14-17 Clusters

Post by LTZ2014 »

bstoner wrote: Tue Apr 11, 2023 7:47 am $20. But honestly it would be way cheaper and easier to do it yourself. Plus the hastle of down time for a week or two while you are without your IPC. You pull the IPC, hook up the chip reader, make two changes to the data, and reinstall it. It took me about an hour to do it all.

Buy the chip reader here: https://www.amazon.com/gp/product/B07R5 ... =UTF8&th=1
Download the software and drivers: https://auto-download.com/download/get/ ... c_rar.html
Remove IPC: viewtopic.php?t=1588#p14193
Follow the instructions on the PDF: https://drive.google.com/file/d/1oXRN7L ... sp=sharing

Ok so i followed the instructions bit by bit, but when I plugged it back the dlc and backlight didnt work and the gauges went nurts. I even rewrote back the original file with no luck. I am not sure what i did wrong but any thoughts would be much appreciated as this my daily and now iam stuck with a gutted dash.
Lord Vader
Posts: 74
Joined: Wed Aug 18, 2021 10:44 pm

Re: Enabling Performance Pages on 14-17 Clusters

Post by Lord Vader »

That happened to me too. I didn't select the correct chip type when I read it initially. That scrambled the file and the EEPROM programming. I could send you my file if you want and you could try putting your VIN in and writing it back to your cluster.
LTZ2014
Posts: 3
Joined: Mon Aug 01, 2022 7:59 am

Re: Enabling Performance Pages on 14-17 Clusters

Post by LTZ2014 »

Yes please and thanks alot.

Alamrwa@hotmail.com
Post Reply